FEATURES High efficiency: 91% 5V/10A,48Vin 90% 5V/8A,24Vin Size: 33.0x22.8x9.3mm (1.30x0.90x0.37) Industry standard 1/16th brick size & pinout Input UVLO OTP and output OCP, OVP (default is auto-recovery) Output voltage trim: -20%, +10% Monotonic startup into normal and pre-biased loads 2250V isolation and basic insulation No minimum load required SMD and Through-hole versions ISO 9001, TL 9000, ISO 14001, QS 9000, OHSAS 18001 certified manufacturing facility UL/cUL 60950-1 (US & Canada) Recognized th Delphi Series V36SE, 1/16 Brick DC/DC Power Modules: 18~75Vin, up to 50W OPTIONS th The Delphi Series V36SE, 1/16 Brick, 18~75V wide input, single SMD pins output, isolated DC/DC converter, is the latest offering from a world Positive remote On/Off leader in power systems technology and manufacturing Delta OTP and output OVP, OCP mode Electronics, Inc. This product family provides up to 50 watts of power (Auto-restart or latch) th in the industry standard 1/16 brick form factor (1.30x0.90) and pinout. With creative design technology and optimization of component placement, these converters possess outstanding electrical and thermal performance, as well as extremely high reliability under highly stressful operating conditions. For the 5.0V output module, it delivers 50W(10A) output with 36 to 75V input and delivers 40W (8.0A) output while the input is 18 to 36V to the same module. Typical efficiency of APPLICATIONS the 5.0V/10A module is greater than 91%. All modules are protected Optical Transport from abnormal input/output voltage, current, and temperature Data Networking conditions. For lower power needs, but in a similar small form factor, Communications please check out Delta S48SP (36W or 10A) and S36SE (17W or 5A) Servers series standard DC/DC modules. DS V36SE05010 03282018 TECHNICAL SPECIFICATIONS (T =25C, airflow rate=300 LFM, V =48Vdc, nominal Vout unless otherwise noted.) A in PARAMETER NOTES and CONDITIONS V36SE05010(Standard) Min. Typ. Max. Units ABSOLUTE MAXIMUM RATINGS Input Voltage Vdc Continuous 80 Vdc Transient (100ms) 100ms 100 Vdc Operating Temperature Refer to figure 19 for measuring point -40 119 C Storage Temperature -55 125 C Input/Output Isolation Voltage 2250 Vdc INPUT CHARACTERISTICS Operating Input Voltage 18 48 75 Vdc Input Under-Voltage Lockout Turn-On Voltage Threshold 16 17 18 Vdc Turn-Off Voltage Threshold 15 16 17 Vdc Lockout Hysteresis Voltage 0.5 1 1.8 Vdc Maximum Input Current 100% Load, 18Vin 3.9 A No-Load Input Current 40 mA Off Converter Input Current 8 mA 2 2 Inrush Current (I t) 1 A s Input Reflected-Ripple Current P-P thru 12H inductor, 5Hz to 20MHz 10 mA Input Voltage Ripple Rejection 120 Hz 50 dB OUTPUT CHARACTERISTICS Output Voltage Set Point Vin=48V, Io=Io.max, Tc=25C 4.95 5.00 5.05 Vdc Output Voltage Regulation Over Load Io=Io, min to Io, max 3 10 mV Over Line Vin=36V to 75V 3 10 mV Over Temperature Tc=-40C to 85C 50 mV Total Output Voltage Range Over sample load, line and temperature 4.85 5.00 5.15 V Output Voltage Ripple and Noise 5Hz to 20MHz bandwidth Peak-to-Peak Full Load, 1F ceramic, 100F tantalum 60 mV RMS Full Load, 1F ceramic, 100F tantalum 10 mV Operating Output Current Range Vin=18V-36V 0 8.0 A Operating Output Current Range Vin=36V-75V 0 10.0 A Output Over Current Protection Output Voltage 10% Low 110 140 % DYNAMIC CHARACTERISTICS Output Voltage Current Transient 48V, 10F Tan & 1F Ceramic load cap, 0.1A/s Positive Step Change in Output Current 25% Io.max to 50% Io.max 100 mV Negative Step Change in Output Current 50% Io.max to 25% Io.max 100 mV Settling Time (within 1% Vout nominal) 200 s Turn-On Transient Start-Up Time, From On/Off Control 30 ms Start-Up Time, From Input 30 ms Maximum Output Capacitance (note1) Full load 5% overshoot of Vout at startup 5000 F EFFICIENCY 100% Load Vin=48V 91.0 % 100% Load Vin=24V 90.0 % 60% Load Vin=48V 90.0 % ISOLATION CHARACTERISTICS Input to Output 2250 Vdc Isolation Resistance 10 M Isolation Capacitance 1000 pF FEATURE CHARACTERISTICS Switching Frequency 580 KHz ON/OFF Control, Negative Remote On/Off logic Logic Low (Module On) Von/off 0.8 V Logic High (Module Off) Von/off 2.4 18 V ON/OFF Control, Positive Remote On/Off logic Logic Low (Module Off) Von/off 0.8 V Logic High (Module On) Von/off 2.4 18 V ON/OFF Current (for both remote on/off logic) Ion/off at Von/off=0.0V 1 mA Leakage Current (for both remote on/off logic) Logic High, Von/off=15V Pout max rated power,Io Io.max Output Voltage Trim Range -20 10 % Output Voltage Remote Sense Range Pout max rated power,Io Io.max 10 % Output Over-Voltage Protection Over full temp range % of nominal Vout 115 140 % GENERAL SPECIFICATIONS MTBF Io=80% of Io, max Ta=25C, airflow rate=300FLM 5.1 M hours Weight 12.1 grams Over-Temperature Shutdown Refer to figure 19 for measuring point 129 C Note1: For applications with higher output capacitive load, please contact Delta V36SE05010 03282018 2