1 2 3 4 5 6 7 ECR COMMENT REV DATE ECN NUMBER 003 07 May 2020 C04605 TYPO CORRECTION 002 27 Apr 2020 C04605 UPDATE PLATING DESCRIPTION ON SUPPLIER DRAWING AND WEB SPECS MATERIALS HOUSING ZINC ALLOY A FULLY SCREENED ROBUST RANGE OF DIN CONNECTORS HOUSING FINISH BRIGHT NICKEL PLATED A A FOR USE IN INSTRUMENTATION AND AUDIO APPLICATIONS. OR BLACK CHROME AVAILABLE IN TWO FINISHES MOULDING NYLON BRIGHT NICKEL AND BLACK CHROME. CONTACTS BRASS CZ121, SILVER PLATED ROBUST CONSTRUCTION INCORPORATING CABLE GRIP AND CABLE CLAMP MILD STEEL, SILVER PLATED STRAIN RELIEF. GROMMET BLACK PVC LOCKING LATCH ZINC ALLOY, NICKEL PLATED MANUFACTURED TO DIN 41524, 45322, 45326, 45327 AND 45329. SCREW MILD STEEL, NICKEL PLATED B B ELECTRICAL RATED VOLTAGE 34V A/C or D/C CURRENT RATING 2 AMP TEST VOLTAGE 500V r.m.s DIMENSIONS INSULATION RESISTANCE 103 M MIN AT 100V DC CONTACT RESISTANCE 10m MAX CAPACITANCE (MATED) 3 pF RECOMMENDED CABLE SIZE MAX CABLE 6mm MAX CONDUCTOR 1mm C C PRESS TO OPEN CLIMATIC CLIMATIC CATEGORY 25/070/21 TEMPERATURE RANGE -25 C TO +70 C DAMP HEAT, STEADY STATE 21 DAYS PART NUMBER 8.4 TYPE NICKEL BLACK 25.4 34.9 3 WAY 590-0300 591-0300 D D 4 WAY 590-0400 591-0400 60.3 5 WAY 45 590-0500 591-0500 5 WAY 60 590-0510 591-0510 5 WAY 590-0520 591-0520 6 WAY 590-0600 591-0600 7 WAY 590-0700 591-0700 8 WAY 590-0800 591-0800 E E PROPRIETARY AND CONFIDENTIAL: AUTHOR TITLE SB UNLESS OTHERWISE SPECIFIED IF IN DOUBT ASK DO NOT SCALE DRAWING GENERAL SPECIFICATION DIMENSIONS ARE IN MILLIMETRES THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE EDITOR FILE FINISH PROPERTY OF ALPHA 3 MANUFACTURING. SEE NOTE DT 590-591 SERIES LINEAR & RADIAL TOLERANCE: ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE MATERIAL APPROVER PART NO DECIMAL PLACES WRITTEN PERMISSION OF ALPHA 3 MANUFACTURING SEE NOTE PA LATCHING DIN CONNECTORS IS PROHIBITED. 1 DECIMAL PLACE THIRD ANGLE PROJECTION THE FINISHED PRODUCT SHOULD BE CLEAN AND FREE FROM ALL EDIT DATE ISSUE/REV. SHEET 1 OF 1 003 07/05/2020 DEM Manufacturing is a division of Alpha 3 Manufacturing LTD 2 DECIMAL PLACES LIQUIDS AND DEBRIS. SURFACES SHOULD BE OF UNIFORM DEM Manufacturing, Deltron Emcon House, Hargreaves Way, ANGULAR TOLERANCE: RELEASE DATE APPEARANCE FREE FROM SHARP EDGES, BURRS AND CORROSION SCALE 1:1 A4 RELEASED 07/05/2020 +44(0)1724 273200 www.dem-uk.com Sawcliffe Ind. Park, Scunthorpe, North Lincolnshire, DN15 8RF, UK 5.8 13.5 16.11 2 3 4 5 6 7 ECR COMMENT REV DATE ECN NUMBER 001 23 Apr 2018 C03817 ADD DESCRIPTION TO WEB SPEC 001 27 Jun 2017 C03654 ADD PIN BASE NUMBERS TO WEB SPECS PIN VARIATIONS USED IN: 590 / 591 / 592 / 600 / 601 / 610 / 611 - DIN PLUG CONNECTORS A A 4 WAY 3 WAY 5 WAY DICE 5 WAY 45 18 B B 54 90 45 45 72 6 WAY C C 5 WAY 60 7 WAY 8 WAY D D 60 60 45 45 MANUFACTURED TO DIN STANDARD 41524, 45322, 45326, 45327 AND 45329 E E PROPRIETARY AND CONFIDENTIAL: AUTHOR TITLE DT UNLESS OTHERWISE SPECIFIED IF IN DOUBT ASK DO NOT SCALE DRAWING PIN ORIENTATIONS DIMENSIONS ARE IN MILLIMETRES THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE EDITOR FILE FINISH PROPERTY OF ALPHA 3 MANUFACTURING. CLEAN DT DIN PLUG PIN ORIENTATION LINEAR & RADIAL TOLERANCE: ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE MATERIAL APPROVER PART NO DECIMAL PLACES WRITTEN PERMISSION OF ALPHA 3 MANUFACTURING REFER TO INDIVIDUAL RANGES AY DIN PLUG PIN BASE IS PROHIBITED. 1 DECIMAL PLACE THIRD ANGLE PROJECTION THE FINISHED PRODUCT SHOULD BE CLEAN AND FREE FROM ALL DEM Manufacturing is a division of Alpha 3 Manufacturing LTD ISSUE/REV. VERSION 2 DECIMAL PLACES SHEET 1 OF 1 001 11 LIQUIDS AND DEBRIS. SURFACES SHOULD BE OF UNIFORM DEM Manufacturing, Deltron Emcon House, Hargreaves Way, ANGULAR TOLERANCE: EDIT DATE Sawcliffe Ind. Park, Scunthorpe, North Lincolnshire, DN15 8RF, UK APPEARANCE FREE FROM SHARP EDGES, BURRS AND CORROSION SCALE 5:1 A4 RELEASED 23 Apr 2018 +44(0)1724 273200 www.dem-uk.com 0.7