90P1 Description: C The 07515 Foot Grounder provides a continuous ground path between an operator and a properly grounded ESD protected floor. These foot grounders are designed for use on standard shoes. They can be easily adjusted to fit the individual D wearer. These foot grounders are made from non-marring three layer grey reversible LISTED static dissipative rubber with a non-carbon tear resistant inner scrim layer. This unit includes a blue tab with carbon suffused fibers and a snap-loc system for quick and easy fastening and removal. Full elastic strap provides maximumflexin comfort. This heel E grounder is UL listed. The product has been tested to ESD STM 97.2 - Floor materials and Footwear Voltage Measurement in Combination with a Person. It is a suitable ESD footwear component in Flooring - Footwear System when used as the primary grounding 7 method (<3.5 x 10 ohms per ESD STM 97.1 Floor Materials and Footwear-Resistance Measurement in Combination with a Person.) B Components: A. 0.060 thick rubber, 1.50 wide, 3-layer reversible non-smudge static dissipative rubber cup. B. 3/8 wide, 30 long blue polyester tab contains electrically conductive carbon A suffused fibers. C. 3/4 wide, blue elastic material for comfort. D. 1/4 watt, 2 megohm black molded external resistor. E. Black snap-loc fastening system allows for quick Detail of snap-loc fastener and easy fastening and removal. listed for safety and date coded. Tab to cup resistance: 6 7 10 - 10 Ohms 100 volts Made in America Note: ITEM DESCRIPTION Two heel straps are recommended for reliable grounding and ESD 6 7 protection, providing ground when one foot is off the floor. 07515 Foot Ground, Heel, 2 megohm resistor, RTG: 10 - 10 Ohms Operator is grounded when foot is in contact with grounded dissipative or conductive flooring. Our UL listed foot grounders are rated at 250 VAC. It is not recommended to use them where exposure Desco recommends the use of foot ground tester item No. 19252, 19253, to line voltages above 250 VAC is possible. Caution: The foot grounder is for ESD control. It will not 98280/98273, or 98280/98254. reduce or increase your risk of receiving electric shock when using or working on electrical equipment. For additional information on the use and maintenance of foot grounders please ask for Technical Bulletins TB-2020, TB-2040, TB-3000. Item 07515 is UL listed. FOOT GROUND, HEEL, 3-LAYER, NON-MARRING, 2 MEG DESCO WEST: 3651 WALNUT AVE., CHINO, CA 91710 WEB SITE: www.desco.com PHONE (909) 627-8178 FAX (909) 627-7449 DRAWING NUMBER DATE: DESCO EAST: 90 HUDSON RD, CANTON, MA 02021-1407 07515 8/07 PHONE (781) 821-8370 FAX (781) 575-0172 2007 DESCO INDUSTRIES INC. Employee Owned DESCOX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Antistatic Control Products category: Click to view products by Desco manufacturer: Other Similar products are found below : 13020 13490 13870 13879 13881 13883 13882 14404 2202SP 3039 37061 42470 09060 09857 42516 37059 04563 17252 19691 19695 09037 09826 09813 66070 100816 68101 68103 98132 73741 13868 13485 13457 13245 13468 13420 13332 13205 13135 91070 8031 8523 66085 40931 37081 13080 13215 13806 73749 010-0225 17260