Description The Universal Snap Mounting Kit includes a SCREW 10mm stud, 10mm socket, threaded backing washer, conical nut, long screw, short screw, and ESD common point ground label. Everything needed to field install a stud or SOCKET STUD socket on all soft materials up to 3/8 thick. Screws are 6-32 Flat Head Phillips machine screws one 1/4 long and one 3/8 long. Just punch a hole through the mat and screw on the socket or stud, whichever is preferred, using one or the other screw. All that is needed is a Phillips screwdriver. WASHER COMMON POINT GROUND LABEL Materials Screws are made of stainless steel Washer is made of stainless steel Socket is made of brass with nickel plating Conical nut is made of brass with nickel plating CONICAL NUT Common point ground label is made of polycarbonate Per ANSI/ESD S8.1 section 5.1 Application, The ESD common point ground symbol should be used to indicate the location of an acceptable common point ground as defined by ANSI/ESD S6.1 UNIVERSAL SNAP MOUNTING KIT Made in America DESCO WEST: 3651 WALNUT AVE., CHINO, CA 91710 WEB SITE: www.Desco.com DATE: DRAWING PHONE (909) 627-8178 FAX (909) 627-7449 FAX REQUEST (909) 627-7126 June NUMBER DESCO EAST: ONE COLGATE WAY, CANTON, MA 02021-1407 2009 PHONE (781) 821-8370 FAX (781) 575-0172 09864 2009 DESCO INDUSTRIES INC. Employee OwnedX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Antistatic Control Products category: Click to view products by Desco manufacturer: Other Similar products are found below : 13020 13490 13870 13879 13881 13883 13882 14404 2202SP 3039 37061 42470 09060 09857 42516 37059 04563 17252 19691 19695 09037 09826 09813 66070 100816 68101 68103 98132 73741 13868 13485 13457 13245 13468 13420 13332 13205 13135 91070 8031 8523 66085 40931 37081 13080 13215 13806 73749 010-0225 17260