Static Shielding Bag 1000 Series This transparent metal-in static shielding bag is designed to provide a Meets ANSI/ESD S20.20, Packaging standard ANSI/ESD S541, and static safe environment for ESD sensitive electronic devices. Bags are Static Control Bag ANSI/ESD S11.4 Level 3 printed with an ESD protective symbol and a lot code for traceability. Open top (1000 Series) and ZipTop (3000 Series) styles are available. Physical Typical Value Testing Method The bags are heat sealable. Tensile Strength 4600 PSI, 32 MPa ASTM D882 SCS Static Shielding Bags 1000 Series are manufactured from a polyester, metal, polyethylene laminate. The polyester dielectric in Puncture Resistance 12 lbs, 53 N MIL-STD-3010C Method concert with the metal layer provides discharge shielding. The exterior 2065 being static dissipative allows electrostatic charges to be removed Seal Strength 11 lbs, 48 N ASTM D882 when grounded. Open Top Bag ZipTop Bag Thickness 2.8 mils, 0.071 mm +/-10% MIL-STD-3010C Method Open Top Bag ZipTop Bag 1003 Marking Adhesion Pass IPC-TM-650 2.4.1 Transparency 40% Tobias Static Shielding Bag Static Shielding Bag Electrical Typical Value Testing Method 1000 1000 Discharge Shielding Discharge Shielding ESD Shielding <10 nJ ANSI/ESD STM11.31 ATTENTION: ATTENTION: 7 11 Contents may be Static Sensitive 7 11 Contents may be Static Sensitive 4 11 Handling Precautions Required Handling Precautions Required Surface Resistance - 1 x 10 to < 1 x 10 ohms ANSI/ESD STM11.11 OTHER PET/ALU/PE OTHER PET/ALU/PE Interior LOT 13910987654321 LOT 13910987654321 11 Surface Resistance - < 1 x 10 ohms ANSI/ESD STM11.11 Exterior Static Decay < 2 seconds ETS 406D Tolerance: Width -0, +1/4 Cleanliness Typical Value Testing Method Length +/- 1/8 Offset 0 to 1/4 Note: Standard bag markings shown Tolerance (inches): Width -0, +0.250 Length +/- 0.125 Oset O to 0.250 ff above and are not to scale. Seal width 3/8 with a tolerance of +/- 1/8 Seal width +/- 0.125 Silicone Not Detected FTIR Heat Sealing Conditions Typical Value Temperature 300F 375F, 149C 190C Time 0.5 3.5 seconds Pressure 30 70 PSI, 206 482 KPa Bag is free of amines, silicones and heavy metals. This product is intended for commercial use only. This product is not on the Qualified Product Listing under the Defense Standardization Program. RoHS, REACH and Conflict Minerals, Statement See the Desco Industries RoHS, REACH, and Conflict Minerals Statement: DescoIndustries.com/ROHS3.aspx Made in the Specifications and procedures subject to change without notice. United States of America See the SCS Limited Warranty: StaticControl.DescoIndustries.com/Limited-Warranty.aspx 1000 SERIES STATIC SHIELDING BAG DRAWING 926 JR Industrial Drive, Sanford, NC 27332 DATE WEB SITE: StaticControl.com NUMBER April PHONE (919) 718-0000 WEST: (909) 627-9634 1000 Series 2019 2019 DESCO INDUSTRIES INC Employee OwnedX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Antistatic Control Products category: Click to view products by SCS manufacturer: Other Similar products are found below : 13505 13870 14404 20-053-0017 2229 2231 3039 37061 39792 42470 XON-ASB4X30 XON-ASB4X6 XON-ASB6X30 09813 09857 XON-ASB8X10 XON-ASB6X10 19695 09037 68101 68103 73741 13515 13869 13868 13485 13457 13245 13332 13205 13135 91070 8031 8523 13080 13215 157 ROLL BEIGE 1.0 VERAX1R-300R 17260 66051 12550 19863 09121 73831 13340 13338 04541 19696 16104 SPI-20686