DESCO INDUSTRIES INC TECHNICAL BULLETIN TB-7041 Statguard Dissipative Neutral Floor Cleaner Application Instructions Made in the United States of America EQUIPMENT NEEDED: Push broom Clean and untreated mop 2 dedicated buckets (Clean bucket and rinse bucket) Statguard Dissipative Neutral Floor Cleaner 1. Push broom the surface to be cleaned. 2. For damp mop, dilute Statguard Dissipative Cleaner 10 to 1 (five (5) gallons of clean water to two (2) quarts of cleaner concentrate). For scrub use 15 to 1. 3. Thoroughly mix the cleaner solution before damp mop application. Use a clean, untreated mop to damp mop the area. Wring out excess fluid and do Figure 1. Statguard Dissipative Neutral Floor Cleaner not flood a treated floor with water. For a scrubbing machine use 175 to 350 RPM with red pad. Description 4. Allow 30 to 60 minutes drying time before walking Statguard Dissipative Neutral Floor Cleaner is on the cleaned area. formulated to clean floors treated with Statguard Clean floors treated with Statguard Floor Finish using Dissipative Floor Finish and Statguard Low-VOC Statguard Cleaner. Do not damp mop with high alkaline Dissipative Floor Finish, as well as other dissipative or high residue cleaner. Using harsh detergents can or conductive floor tiles and polymer type floor finishes. damage a treated floor s static dissipative properties. It is formulated with dissipative agents that will rejuvenate and improve the static dissipative properties Physical Properties of the flooring surface that it is used with without leaving behind residue that can impede dissipation or % Solids 10% conductive properties of the flooring material or finish. pH 7.0 Application Color Green The Statguard Dissipative Neutral Floor Cleaner is Ordor Floral more aggressive than using a damp mop with a diluted Coverage 20,000 sq.ft./gal. of finish and water and does reduce the gloss down as concentration it cleans the surface. Heavy to moderate traffic floors can be cleaned once a week. Light traffic floors can be Freeze/Thaw Stability Passes three cycles cleaned 2 to 3 times a month or as needed. Drying Time 30 - 60 min. 55% RH Testing a small area for compatibility if Statguard 6 9 Surface Resistivity 1 x 10 to < 1 x 10 ohms per Dissipative Neutral Floor Cleaner has not been used ANSI/ESD STM7.1 and ESD before is recommended. TR53 Storage Statguard Dissipative Neutral Floor Cleaner does not have a set life span. The chemicals are not known to degrade over time when stored at the proper temperature conditions as stated in the Safety Data Sheet. We also recommend that the product be stored in its original container and be sealed when not in use. DESCO INDUSTRIES INC - 3651 Walnut Avenue, Chino, CA 91710 (909) 627-8178 Website: DescoIndustries.com 2019 DESCO INDUSTRIES INC TB-7041 Page 1 of 2 August 2019 Employee OwnedRoHS, REACH, and Conflict Minerals Statement See the Desco Industries RoHS, REACH, and Conflict Minerals Statement: DescoIndustries.com/ROHS.aspx Desco Industries Limited Warranty See the Desco Industries Limited Warranty: DescoIndustries.com/Warranty.aspx Statguard Dissipative Neutral Floor Cleaner is available from these Desco Industries brands: for service and support in North America 2.5 Gallons 10561 5.0 Gallons 10566 for service and support in North America 2.5 Gallons 46030 5.0 Gallons 46031 EUROPE for service and support in United Kingdom and Europe 10 Litres 220522 for service and support in Asia 10 Liters 10561 20 Liters 10566 DESCO INDUSTRIES INC - 3651 Walnut Avenue, Chino, CA 91710 (909) 627-8178 Website: DescoIndustries.com 2019 DESCO INDUSTRIES INC TB-7041 Page 2 of 2 Employee Owned