Desiccant is a drying agent used to lower the moisture INTERIOR BAG NUMBER OF DESICCANT UNITS content of air inside a closed space, such as a Moisture SURFACE AREA* **MIH <20% MIH <30% MIH < 40% Barrier Bag (ANSI/ESD S11.4 Level 1 and Level 2 Static Control Bags). Desiccant is packaged in fractional units in 100 sq. in. 1.5 1.0 1.0 order to facilitate its usage with a variety of bag sizes. One 130 sq. in. 2.0 1.5 1.0 full unit of packaged desiccant will absorb the following 160 sq. in. 2.0 1.5 1.5 quantities of water at equilibrium with air at 77F (25C): 200 sq. in. 2.5 2.0 1.5 3.00 grams 20% rH and 6.00 grams 40% rH, when 240 sq. in. 3.0 2.0 1.5 tested to MIL-D-3464. 290 sq. in. 4.0 2.5 2.0 340 sq. in. 4.5 3.0 2.5 In order to provide a complete moisture barrier packaging 390 sq. in. 5.0 3.5 2.5 assembly, desiccant must be inserted into the bag, prior to 450 sq. in. 5.5 4.0 3.0 having the bag vacuum sealed. The recommended amount 510 sq. in. 6.5 4.5 3.5 of desiccant is dependent on the interior surface area of 580 sq. in. 7.5 5.0 4.0 the bag to be used. The table is a reference indicating recommended minimum amounts of desiccant that should be 650 sq. in. 8.0 5.5 4.0 used with Moisture Barrier Bags. 720 sq. in. 9.0 6.0 4.5 Table for recommended desiccant usage. Information taken out of EIA-583, Table 1, Page 8. *To measure interior bag surface area, multiply length x width x 2 **MIH = Maximum Interior Humidity (%) Desiccant paks are available from Desco in the following unit sizes and standard packages: Item Unit Size Std. Package Dimensions 13840 1/2 unit Box of 700 1.5 x 3 13843 1 unit Box of 450 2 x 4 13844 1 unit Pail of 300 2 x 4 13850 1/2 unit Pail of 550 1.5 x 3 As packaged Desco 13850 meets MIL-D-3464, Type II and is on the QPL (Qualified Product List). Click here to see Desi-Pak (supplier Cage Code 00334). Fill Contents: Activated Clay 13843 & 13844 13840 & 13850 Paper: Tyvek ...it is important to take possible temperature exposure into account when shipping Warranty: 3 Years from date of manufacture electronic parts. It is particularly important to consider what happens to the interior of a Made in the package if the environment has high humidity. If the temperature varies across the dew United States of America Specifications and procedures subject to change without notice. point of the established interior environment of the package, condensation may occur. The interior of a package should either contain desiccant or the air should be evacuated from the package during the sealing process. The package itself should have a low WVTR. (ESD Desiccant Pak Handbook ESD TR20.20 section 5.4.3.2.2) DESCO WEST: 3651 WALNUT AVE., CHINO, CA 91710 WEBSITE: Desco.com DATE: PHONE (909) 627-8178 DRAWING NUMBER December DESCO EAST: ONE COLGATE WAY, CANTON, MA 02021-1407 13850 2013 PHONE (781) 821-8370 2013 DESCO INDUSTRIES INC. Employee Owned SAFETY DATA SHEET May be used to comply with ANSI Z400.1-2004, and Globally Harmonized System (OSHA Hazcom 29 CFR 1910.1200, (EU) No.453/2010 and Japan JIS 7253:2012). Standards must be consulted for specific requirements. Revision Date: 2018-02-27 SECTION 1 IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING 1.1 Product identifiers Product Name: Desi Pak EC No.: None REACH Registration No.: None CAS No.: None 1.2 Relevant identified uses of the substance or mixture and uses advised against Identified use: Desiccant 1.3 Details of the supplier of the safety data sheet Supplier: Desco 3651 Walnut Ave Chino, CA 91710 (909) 627-8178 Email Address: Service Desco.com 1.4 Emergency telephone number Emergency Number: (909) 627-8178 SECTION 2 HAZARDS IDENTIFICATION 2.1 Classification of substance or mixture No reportable hazardous components as defined by the Globally Harmonized System (OSHA Hazcom 29 CFR 1910.1200, (EU) No.453/2010 and Japan JIS 7253:2012). 2.2 Label elements Not a dangerous substance according to GHS. 2.3 Other hazards None known. SECTION 3 COMPOSITION/INFORMATION ON INGREDIENTS 3.1 Substances No reportable hazardous components as defined by the Globally Harmonized System (OSHA Hazcom 29 CFR 1910.1200, (EU) No.453/2010 and Japan JIS 7253:2012). SECTION 4 FIRST AID MEASURES 4.1 Description of first aid measures General advice No known delayed effects. Consult a physician for all exposures except for minor instances. If inhaled INHALATION: If exposed to excessive levels of dust or fumes, remove to fresh air and get medical attention. Get medical attention if cough and other symptoms develop. If you feel unwell, seek medical advice (show the label where possible). In case of skin contact Wash off immediately with plenty of water for at least 15 minutes. Use a mild soap if available. In case of eye contact Do not rub affected area. Rinse immediately with plenty of lukewarm water, also under the eyelids, for at least 15 minutes. Obtain medical attention. DESCO - 3651 Walnut Ave., Chino, CA 91710 (909) 627-8178 Website: Desco.com 2018 DESCO INDUSTRIES, INC. Page 1 of 7 Employee Owned