Desiccant is a drying agent used to lower the moisture INTERIOR BAG NUMBER OF DESICCANT UNITS content of air inside a closed space, such as a Moisture SURFACE AREA* **MIH <20% MIH <30% MIH < 40% Barrier Bag (ANSI/ESD S11.4 Level 1 and Level 2 Static Control Bags). Desiccant is packaged in fractional units in 100 sq. in. 1.5 1.0 1.0 order to facilitate its usage with a variety of bag sizes. One 130 sq. in. 2.0 1.5 1.0 full unit of packaged desiccant will absorb the following 160 sq. in. 2.0 1.5 1.5 quantities of water at equilibrium with air at 77F (25C): 200 sq. in. 2.5 2.0 1.5 3.00 grams 20% RH and 6.00 grams 40% RH, when 240 sq. in. 3.0 2.0 1.5 tested to MIL-D-3464. 290 sq. in. 4.0 2.5 2.0 340 sq. in. 4.5 3.0 2.5 In order to provide a complete moisture barrier packaging 390 sq. in. 5.0 3.5 2.5 assembly, desiccant must be inserted into the bag, prior to 450 sq. in. 5.5 4.0 3.0 having the bag vacuum sealed. The recommended amount 510 sq. in. 6.5 4.5 3.5 of desiccant is dependent on the interior surface area of 580 sq. in. 7.5 5.0 4.0 the bag to be used. The table is a reference indicating recommended minimum amounts of desiccant that should be 650 sq. in. 8.0 5.5 4.0 used with Moisture Barrier Bags. 720 sq. in. 9.0 6.0 4.5 Table for recommended desiccant usage. Information taken out of EIA-583, Table 1, Page 8. *To measure interior bag surface area, multiply length x width x 2 **MIH = Maximum Interior Humidity (%) Desiccant paks are available from Desco in the following unit sizes and standard packages: Item Unit Size - Dims Std. Package 13840 1/2 unit - 1.5 x 3 Box of 700 13844 1 unit - 2 x 4 Pail of 300 13850 1/2 unit - 1.5 x 3 Pail of 550 As packaged Desco 13850 meets MIL-D-3464, Type II and is on the QPL (Qualified Product List). Click here to see Desi-Pak (supplier Cage Code 00334). Fill Contents: Activated Clay 13844 13840 & 13850 Paper: Tyvek ...it is important to take possible temperature exposure into account when shipping Warranty: 3 Years from date of manufacture electronic parts. It is particularly important to consider what happens to the interior of a Made in the package if the environment has high humidity. If the temperature varies across the dew United States of America Specifications and procedures subject to change without notice. point of the established interior environment of the package, condensation may occur. The interior of a package should either contain desiccant or the air should be evacuated from the package during the sealing process. The package itself should have a low WVTR. (ESD Desiccant Pak Handbook ESD TR20.20 section 5.4.3.2.2) DESCO WEST: 3651 WALNUT AVE., CHINO, CA 91710 WEBSITE: Desco.com DATE: PHONE (909) 627-8178 DRAWING NUMBER July DESCO EAST: ONE COLGATE WAY, CANTON, MA 02021-1407 13850 2021 PHONE (781) 821-8370 2021 DESCO INDUSTRIES INC Employee Owned SAFETY DATA SHEET May be used to comply with ANSI Z400.1-2004, and Globally Harmonized System (OSHA Hazcom 29 CFR 1910.1200, (EU) No.453/2010 and Japan JIS 7253:2012). Standards must be consulted for specific requirements. Revision Date: 2018-02-16 SECTION 1 IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING 1.1 Product identifiers Product Name: Desi Pak EC No.: None REACH Registration No.: None CAS No.: None 1.2 Relevant identified uses of the substance or mixture and uses advised against Identified use: Desiccant 1.3 Details of the supplier of the safety data sheet Supplier: Desco 3651 Walnut Ave Chino, CA 91710 (909) 627-8178 Email Address: Service Desco.com 1.4 Emergency telephone number Emergency Number: (909) 627-8178 SECTION 2 HAZARDS IDENTIFICATION 2.1 Classification of substance or mixture No reportable hazardous components as defined by the Globally Harmonized System (OSHA Hazcom 29 CFR 1910.1200, (EU) No.453/2010 and Japan JIS 7253:2012). 2.2 Label elements Not a dangerous substance according to GHS. 2.3 Other hazards None known. SECTION 3 COMPOSITION/INFORMATION ON INGREDIENTS 3.1 Substances No reportable hazardous components as defined by the Globally Harmonized System (OSHA Hazcom 29 CFR 1910.1200, (EU) No.453/2010 and Japan JIS 7253:2012). SECTION 4 FIRST AID MEASURES 4.1 Description of first aid measures If inhaled No treatment specified. In case of irritation when dust is inhaled, provide for plenty of fresh air. In case of skin contact When used and handled appropriately no special measures are needed. In case of eye contact No special precautions required. If swallowed No emergency care is anticipated. If large quantities of this material are swallowed, call a physician immediately. Call your local Poison Control Center (In the U.S. call 1-800-222-1222). 4.2 Most important symptoms and effects, both acute and delayed Most important symptoms and The possible symptoms known are those derived from the labelling (see effects, both acute and delayed section 2). No additional symptoms are known. DESCO - 3651 Walnut Ave., Chino, CA 91710 (909) 627-8178 Website: Desco.com 2018 DESCO INDUSTRIES, INC. Page 2 of 8 Employee Owned