STATSHIELD FOIL MOISTURE BARRIER BAG WITH IPC/JEDEC MOISTURE SENSITIVE CAUTION MARKINGS Specifications: Standard Document Meets Requirements of: ANSI/ESD S541 (ANSI/ESD S20.20) ESD Protective Packaging ANSI/ESD S11.4 Level 1 Technical Requirements IPC/JEDEC J-STD-033C Packaging of Moisture/Reflow Sensitive Methods Electrical Properties Typical Values Test Procedures/Method Surface Resistance 4 11 (both exterior and interior) 1 x 10 to < 1 x 10 ohms ANSI/ESD STM11.11 Discharge Shielding <10 nJ ANSI/ESD STM11.31 Static Shielding 20 volts EIA 541 EMI Attenuation 45 db ANSI/ESD S541 Date & Lot Code Printed for QC Physical Properties Typical Values Test Procedures/Method Traceablility Film Thickness Nominal .0040 (.1016mm) 10% MIL-STD-3010, 1003 Tensile Strength 13000 PSI ASTM D882 Weld Seal Puncture Resistance >25 PSI (lbs) MIL-STD-3010, 2065 Seal Strength >12 PSI ASTM D882 Side Weld Seal 3/8 in. Soft Fold Bottom MVTR 0.0003/g/100sq.in/24hours ASTM F1249 Silicone Not detected FTIR Marking Adhesion Pass IPC-TM-650 2.4.1 Abrasion Resistant Coating Static Dissipative Polyester Layer Barrier Layer High Performance Static Dissipative Polyethylene Interior Layer ANSI/ESD S541 Section 6.2 Outside an EPA Transportation of sensitive products outside of an EPA shall require packaging that provides: 1. Low charge generation 2. Dissipative or conductive materials for intimate contact NOTE: The complete dry package concept of packaging 3. A structure that provides electrostatic discharge shielding. for electronics requires three elements: Statshield Moisture Barrier Bags - To Protect RoHS 2, REACH and Conflict Minerals Statement None of the RoHS 2 restricted materials, REACH substances of very high concern as of 2016/06/20, or Conflict Dessicant - To Absorb Moisture Minerals are intentionally added in manufacturing this product. Ref: European Union Directive 2011/65/EU and Regulation (EC) No. 1907/2006/CE. See Desco Industries Inc. Limited Warranty at Desco.com. Humidity Indicator Card - To Monitor Performance For detailed instructions see Technical Bulletin TB-2031 - Moisture Barrier Bags Application Instructions. Statshield and Statfree are Registered Trademarks of Desco Industries Inc. See Bag Selection Chart Click HERE. Made in the United States of America Specifications and procedures subject to change without notice. Statshield bags are packaged 100 per package in an oversized shielding bag. Statshield Foil Shielding Moisture Barrier Bag, .0040 (.1016mm) See Shielding Bag Storage at TB-7057. DESCO WEST: 3651 WALNUT AVE., CHINO, CA 91710 WEB SITE: Desco.com Date: PHONE (909) 627-8178 Drawing Number August DESCO EAST: ONE COLGATE WAY, CANTON, MA 02021-1407 13950 PHONE (781) 821-8370 2016 2016 DESCO INDUSTRIES INC. Employee Owned