Metal-Out Static Shielding Bag 1500
This transparent metal-out static shielding bag is designed to provide static
Meets ANSI/ESD S20.20 Packaging Standard, ANSI/ESD S541, and
safe packaging for the shipment and/or storage of ESD sensitive items
Static Control Bag ANSI/ESD S11.4 Level 3
including outside ESD protected areas. Bags are printed with an ESD
protective symbol and a lot code for traceability. Open Top and ZipTop styles
Physical Typical Value Testing Method
are available. The bags are heat sealable.
Puncture Resistance 10 lbs, 44 N MIL-STD-3010 Method
SCS Metal-Out Static Shielding Bags 1500 are manufactured from a top
2065
coat, metal, polyester, polyethylene laminate. The proprietary top coating is
designed to protect the metal layer. Polyester dielectric, in concert with the Seal Strength 14 lbs, 62 N ASTM D882
metal layer, is intended to provide shielding of Electrostatic Discharge (ESD)
Thickness 3 mils, .0762 mm +/-10% MIL-STD-3010 Test Method
and to help minimize the penetration of electric field.
1003 Method B
Open Top Bag
ZipTop Bag
Open Top Bag ZipTop Bag
Marking Adhesion Pass IPC-TM-650 2.4.1
Transparency 40% Tobias
Electrical Typical Value Testing Method
Discharge Shielding <10 nJ ANSI/ESD STM11.31
4 11
Surface Resistance - 1 x 10 to < 1 x 10 ohms ANSI/ESD STM11.11
Interior
4 6
Surface Resistance - 1 x 10 to < 1 x 10 ohms ANSI/ESD STM11.11
Exterior
Charge Retention <100 volts 1410.515 Rev 2
Cleanliness Typical Value Testing Method
Silicone Not Detected ASTM-E168 (FTIR)
Tolerance: Width -0, +1/4" Note: Standard bag markings shown
Tolerance (inches): Width -0, +0.250 Length +/- 0.125 Oset O to 0.250 ff
Heat Sealing Conditions Typical Value
Length +/- 1/8" Offset 0 to 1/4" above and are not to scale.
Seal width +/- 0.125
Seal width 3/8" with a tolerance of +/- 1/8"
Temperature 300F 375F, 149C 190C
Time 0.5 3.5 seconds
Pressure 30 70 PSI, 206 482 KPa
Bag is free of amines, N-octanoic acid, silicones and heavy metals.
This product is intended for commercial use only. This product is not on
the Qualiefi d Product Listing under the Defense Standardization Program.
RoHS 2, REACH, and Conflict Minerals Statement
None of the RoHS 2 restricted materials or REACH substances of very high concern as
of 2014/12/17, or Conflict Minerals are intentionally added in manufacturing this product.
Specifications and procedures subject to change without notice.
Ref: European Union Directive 2011/65/EU and Regulation (EC) No. 1907/2006/CE.
See SCS Warranty, Limitation of Liability and Remedies
1500 SERIES METAL-OUT STATIC SHIELDING BAG
DRAWING
DATE
926 JR Industrial Drive, Sanford, NC 27332
NUMBER
WEB SITE: StaticControl.com
November
PHONE (919) 718-0000
1500 Series
2015
2015 DESCO INDUSTRIES INC.
Employee OwnedX-ON Electronics
Largest Supplier of Electrical and Electronic Components
Click to view similar products for scs manufacturer:
Other Similar products are found below :
7001024 732 8810 963E-X 2220 2383 960 1/6PLDES1200 AMWS61M 2205 4270-9R AFM2436L1VGR-F 1001024 100618 230811
8021 SV-CS1 724-PSEU 770760 770758 2384 AFM36720L1VGR AMWS CTA101 CGC151M 150812 SAR-L LABELDISPNSR SV-
SH33 81768 770069 770067 770077 8203 15058 1PLDES300 2126R 24X125 CTM048-21 8253 8204 SAR-S 150Z46 130068 817912
CTA212 81748 CTM051 2360 300630 8264