Metal-Out Static Shielding Bag 1500 This transparent metal-out static shielding bag is designed to provide static safe Meets ANSI/ESD S20.20, Packaging Standard ANSI/ESD S541, and packaging for the shipment and/or storage of ESD sensitive items including Static Control Bag ANSI/ESD S11.4 Level 3 outside ESD protected areas. Bags are printed with an ESD protective symbol Physical Typical Value Testing Method and a lot code for traceability. Open Top and ZipTop styles are available. The bags are heat sealable. Puncture Resistance 10 lbs, 44 N MIL-STD-3010 Method 2065 SCS Metal-Out Static Shielding Bags 1500 are manufactured from a top coated Seal Strength 14 lbs, 62 N ASTM D882 metallized polyester and polyethylene laminate. The proprietary top coating is designed to protect the metal layer and quickly discharge any electrical Thickness 3 mils, .0762 mm +/-10% MIL-STD-3010 Test Method field. Polyester dielectric, in concert with the metal layer, provides shielding for 1003 Method B the bag contents from Electrostatic Discharge (ESD) and helps minimize the Marking Adhesion Pass IPC-TM-650 2.4.1 penetration of an electrical field. Transparency 40% Tobias Open Top Bag ZipTop Bag Open Top Bag ZipTop Bag Electrical Typical Value Testing Method Discharge Shielding <10 nJ ANSI/ESD STM11.31 4 11 Surface Resistance - 1 x 10 to < 1 x 10 ohms ANSI/ESD STM11.11 Interior 4 6 Surface Resistance - 1 x 10 to < 1 x 10 ohms ANSI/ESD STM11.11 Exterior Charge Retention <100 volts 1410.515 Cleanliness Typical Value Testing Method LOT 22110987654321 LOT 22110987654321 Silicone Not Detected ASTM-E168 (FTIR) Heat Sealing Conditions Typical Value Temperature 300F 375F, 149C 190C Tolerance (inches): Width -0, +0.250 Length +/- 0.125 Offset O to 0.250 ** Bags are printed (hot stamp or thermal) with an ESD protective symbol and a lot code for traceabilitySeal width +/- 0.125 . ** Time 0.5 3.5 seconds Note: Standard bag markings shown above and are not to scale. Tolerance: Width -0, +1/4 Pressure 30 70 PSI, 206 482 KPa Length +/- 1/8 Offset 0 to 1/4 Seal width 3/8 with a tolerance of +/- 1/8 Bag is free of amines, N-octanoic acid, silicones and heavy metals. RoHS, REACH, and Conflict Minerals Statement See the SCS RoHS, REACH, and Conflict Minerals Statement: X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Antistatic Control Products category: Click to view products by Desco manufacturer: Other Similar products are found below : 13020 13490 13870 13879 13881 13883 13882 14404 2202SP 3039 37061 42470 09060 09857 42516 37059 04563 17252 19691 19695 09037 09826 09813 66070 100816 68101 68103 98132 73741 13868 13485 13457 13245 13468 13420 13332 13205 13135 91070 8031 8523 66085 40931 37081 13080 13215 13806 73749 010-0225 17260