90P1 Description: The 17200 and 17202 Foot Grounders provide a continuous ground path between an operator and a properly grounded ESD protected flooring. These foot grounders are designed for use on standard shoes. They can be easily adjusted to fit most individuals. Descos foot grounders have a lining that prevents carbon marks on shoes. Foot grounder models LISTED 17200 and 17202 have discrete resistors built into the contact strip. Model 17200 has a one megohm resistor and model 17202 has a two megohm resistor. The product has been tested to ESD STM97.2 - Floor Materials and Footwear Voltage Measurement in Combination with a Person. It is a suitable ESD footwear component in Flooring - Footwear System when used as the primary grounding method (<3.5 x 10E7 ohms per ESD STM 97.1 Floor Materials and Footwear-Resistance Measurement in Combination with a Person.) Components: A. 0.060 thick ( 0.005), 1 wide contact area a. Outer black layer is conductive neoprene. b. Inner layer is insulative neoprene. c. Tear resistant nylon reinforced 4.3 oz. inner scrim layer prevents the rubber from tearing. B. 3/8 wide, 30 long blue nylon ribbon contains 8 electrically conductive carbon suffused fibers, reversible, may be positioned on either side of foot. C. 3/4 wide blue non-elastic hook material. D. 3/4 wide blue stretch loop material, for quick and easy attachment to foot. listed. Lot coded for quality traceability. Specifications Tab to floor contact point: 1 x 10E6 < 1 x10E8 ohms resistance when measured per ESD SP9.2 & ESD TR53 Outside Layer Test Method Abrasion: 3000 cycles ASTM-D-3389 Method B Hardness: 70 Shore A ASTM-D-2240 Tensile PSI (min): 2500lbs. ASTM-D-412 Unless noted, tolerances 1/4 ITEM NUMBER DESCRIPTION Note: Foot Ground, Heel, 1 megohm resistor 17200 Made in the For standing operations, personnel shall be grounded via a wrist strap United States of America system or by a flooring/footwear system. (ANSI/ESDS20.20) 17202 Foot Ground, Heel, 2 meghom resistor ESD footwear should be tested at least daily while worn. See ESD TR53 UL caution Note: This product is not recommended for use on equipment with operating voltage (ESD Handbook TR20.20 section 5.3.3.4) exceeding 250 VAC. The ESD Series is for electrostatic control. It will not reduce or increase your risk of receiving electric shock when using or working on electrical equipment. Follow the same precautions Heel and toe grounders shall be worn on both feet to insure effective you would use without wrist straps, including: Make certain that equipment having a grounding type plug use. (ESD Handbook ESD TR20.20-2008 section 5.3.3.3.4 Footwear is properly grounded. Proper Usage) Specifications and procedures subject to change without notice. FOOT GROUND, HEEL DESCO WEST: 3651 WALNUT AVE., CHINO, CA 91710 WEB SITE: Desco.com DRAWING DATE: PHONE (909) 627-8178 FAX (909) 627-7449 July NUMBER DESCO EAST: ONE COLGATE WAY, CANTON, MA 02021-1407 2012 PHONE (781) 821-8370 FAX (781) 575-0172 17200 2012 DESCO INDUSTRIES INC. Employee OwnedX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Antistatic Control Products category: Click to view products by Desco manufacturer: Other Similar products are found below : 13020 13490 13870 13879 13881 13883 13882 14404 2202SP 3039 37061 42470 09060 09857 42516 37059 04563 17252 19691 19695 09037 09826 09813 66070 100816 68101 68103 98132 73741 13868 13485 13457 13245 13468 13420 13332 13205 13135 91070 8031 8523 66085 40931 37081 13080 13215 13806 73749 010-0225 17260