Product Data Sheet 3M Moisture Barrier Bag Dri-Shield 2000 Product Data Sheet 3M Static Shielding Bag 1900 and 1910 This transparent metal-in static shielding bag is designed to provide a static safe Physical Typical Value Testing Method environment for sensitive electronic devices. Bags are printed with an ESD warning Tensile Strength 5100 PSI, 35 MPa ASTM D882 symbol and a lot code for traceability. Open top (1900) and ZipTop (1910) styles are available. The bags are heat sealable. Puncture Resistance 12 lbs, 53 N MIL-STD-3010C Method 2065 Seal Strength 9 lbs, 40 N ASTM D882 3M Static Shielding Bags 1900 are manufactured from a polyester, metal, polyethylene laminate. The polyester dielectric in concert with the metal layer is Thickness 2.8 mils, .071 mm +/-15% MIL-STD-3010C Method 1003 intended to provide shielding of Electrostatic Discharge (ESD) and to help minimize Marking Adhesion Pass IPC-TM-650 2.4.1 the penetration of electric field. Transparency 40% Tobias These bags are tested to meet or exceed certain electrical and physical requirements Electrical Typical Value Testing Method of Static Shielding Bags, ANSI/ESD S541, and to be ANSI/ESD S20.20 program compliant. Bags are RoHS Compliant* and lead-free**. ESD Shielding <10 nJ ANSI/ESD STM11.31 11 Surface Resistance - <1x10 ohms ANSI/ESD STM11.11 Interior 3M Static Shielding Bag 11 1900 and 1910 Surface Resistance - <1x10 ohms ANSI/ESD STM11.11 Exterior Static Decay < 2 seconds ETS 406D Cleanliness Typical Value Testing Method Silicone Not Detected FTIR Heat Sealing Conditions Typical Value Temperature 375F, 190C Time 0.5 3.5 seconds Pressure 30 70 PSI, 206 482 KPa This product is intended for commercial use only. This product is not on the Qualified Product Listing under the Defense Standardization Program.Product Data Sheet 3M Moisture Barrier Bag Dri-Shield 2000 Product Data Sheet Open Top Bag ZipTop Bag Open Top Bag ZipTop Bag 3M Static Shielding Bag 1900 and 1910 3M Static Shielding Bags, Open Top 1900 Dimensions Part No. Dimensions Part No. Dimensions Part No. (W x L in.) (W x L in.) (W x L in.) 3 x 5 19035 7 x 15 190715 12 x 16 1901216 4 x 4 19044 8x 8 19088 12 x 18 1901218 4 x 6 19046 8 x 10 190810 14 x 18 1901418 5 x 8 19058 8 x 12 190812 15 x 18 1901518 6 x 8 19068 10 x 12 1901012 16 x 24 1901624 6 x 10 190610 10 x 14 1901014 18 x 18 1901818 Tolerance (inches): Width -0, +0.250 Length +/- 0.125 Offset 0 to 0.250 Seal width +/- 0.125 Standard sizes for prompt shipment (usually same day). Tolerance (inches): Width -0, +0.250 11 x 15 1901115 18 x 24 1901824 Width is measured from inside seam to inside seam. Length +/- 0.125 Offset 0 to 0.250 Custom Sizes Available Length is measured from the top edge to the bottom fold. Seal width +/- 0.125 Opening is in the width dimension. Custom bag sizes are available. 3M Static Shielding Bags, ZipTop 1910 Dimensions Part No. Dimensions Part No. Dimensions Part No. (W x L in.) (W x L in.) (W x L in.) Important Notice All statements, technical information, and recommendations related to 3Ms products 3 x 5 19135 6 x 10 191610 11 x 15 1911115 are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for 4 x 6 19146 8 x 8 191810 12 x 16 1911216 your intended application. You assume all risks and liability associated with such use. Any 5 x 8 19158 8 x 12 191812 12 x 18 1911218 statements related to the product which are not contained in 3Ms current publications, or any contrary statements contained on your purchase order shall have no force or effect unless 6 x 8 19168 10 x 12 1911012 18 x 18 1911818 expressly agreed upon, in writing, by an authorized officer of 3M. Custom Sizes Available Warranty Limited Remedy Limited Liability. This product will be free from defects in material and manufacture for one year from the 3M is a trademark of 3M Company. All other trademarks are owned by their respective companies. time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT * RoHS 2011/65/EU Compliant means that the product or part does not contain any of the substances in excess of the maximum LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS concentration values (MCVs) in EU RoHS Directive 2011/65/EU. The MCVs are by weight in homogeneous materials. This FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period information represents 3Ms knowledge and belief, which may be based in whole or in part on information provided by third party stated above, your exclusive remedy shall be, at 3Ms option, to replace or repair the 3M suppliers to 3M. product or refund the purchase price of the 3M product. Except where prohibited by law, 3M In the event any product is proven not to conform with 3Ms Regulatory Information, then 3Ms entire liability and Buyers exclusive will not be liable for any indirect, special, incidental or consequential loss or damage arising remedy will be in accordance with the Warranty section. from this 3M product, regardless of the legal theory asserted. **Lead-free means that the product has less than 2 ppm of lead when tested by ICP-AES, with reference to EPA method 3051A/3052. 3 Electronic Solutions Division Static Control Products 926 JR Industrial Drive Sanford, NC 27332-9733 Toll-Free: 866-722-3736 International: 919-718-0000 Please recycle. Printed in USA. Email: 3mstaticinfo mmm.com 3M 2013. All rights reserved. www.3Mstatic.com 98-0799-1128-9 JHA