Product Data Sheet
Product Data Sheet
3M Metal-Out Static Shielding Bag 2100R/2110R
The transparent, puncture resistant metal-out static shielding bag is designed to
Physical Typical Value Testing Method
provide a static safe environment for sensitive electronic devices. The metal layer is
Tensile Strength 8000 PSI, 55 MPa ASTM D882
positioned near the outer surface to help reduce voltage retention and enhance static
decay. Bags are printed with and ESD warning symbol and a lot code for traceability.
Puncture Resistance 24 lbs, 106 N MIL-STD-3010C Method 2065
Open Top (2100R) and ZipTop (2110R) styles are available. The bags are heat sealable.
Seal Strength 18 lbs, 80 N ASTM D882
3M Static Shielding Bags are manufactured from a top coat, metal, polyester,
Thickness 3.2 mils, .081 mm +/-15% MIL-STD-3010C Method 1003
polyethylene laminate. The proprietary top coating is designed to protect the metal
Marking Adhesion Pass IPC-TM-650 2.4.1
layer. Polyester dielectric, in concert with the metal layer, is intended to provide
shielding of Electrostatic Discharge (ESD) and to help minimize the penetration of
Transparency 37% Tobias
electric field.
Electrical Typical Value Testing Method
The bags are tested to meet or exceed certain electrical and physical requirements
ESD Shielding <10 nJ ANSI/ESD STM11.31
of ANSI/ESD S541 and to be ANSI/ESD S20.20 program compliant. Bags are RoHS
11
Surface Resistance - <1x10 ohms ANSI/ESD STM11.11
Compliant* and lead-free**.
Interior
6
Surface Resistance - <1x10 ohms ANSI/ESD STM11.11
Exterior
Static Decay < 2 seconds ETS 406D
Charge Retention <100 volts CPM 3M TP.21XX
3M Metal-Out Static Shielding Bag
2100R/2110R
Cleanliness Typical Value Testing Method
Silicone Not Detected FTIR
Heat Sealing Conditions Typical Value
Temperature 375F, 190C
Time 0.5 3.5 seconds
Pressure 30 70 PSI, 206 482 KPa
This product is intended for commercial use only. This product is not on the Qualified
Product Listing under the Defense Standardization Program.Product Data Sheet
Open Top Bag
ZipTop Bag
Open Top Bag ZipTop Bag
3M Metal-Out Static Shielding Bag 2100R/2110R
Metal-Out Static Shielding Bags 2100R, Open Top
Dimensions Part No. Dimensions Part No. Dimensions Part No.
(W x L in.) (W x L in.) (W x L in.)
3 x 5 21035 8 x 10 21810 15 x 18 2101518
4 x 4 21044 8 x 12 210812 16 x 24 2101624
4 x 6 21046 10 x 12 2101012 18 x 18 2101818
4 x 26 210426 10 x 14 2101014 18 x 24 2101824
5 x 8 21058 11 x 15 2101115 24 x 24 2102424
6 x 8 21068 12 x 16 2101216 24 x 30 2102430
Standard sizes stocked fTolerance (inches): Width -0, +0.250 Lengor prompt shipment (usually same th +/- 0.125 OTolerance (inches):set 0 to 0.250 ff Width -0, +0.250
6 x 10 210610 12 x 18 2101218 24 x 36 2102436
day). Length +/- 0.125 Offset 0 to 0.250
Seal width +/- 0.125
Width is measured from inside seam to inside seam. Seal width +/- 0.125
8 x 8 21088 14 x 18 2101418
Length is measured from the top edge to the bottom fold.
Opening is in the width dimension.
Custom bag sizes, custom printing, and custom hot stamping
Metal-Out Static Shielding Bags 2110R, ZipTop are available.
Most sizes are packed 100 per case.
Dimensions Part No. Dimensions Part No. Dimensions Part No. Small sizes are packed 500 or 1,000 per case.
(W x L in.) (W x L in.) (W x L in.)
3M is a trademark of 3M Company. All other trademarks are owned by their respective companies.
3 x 5 21135 6 x 8 21168 10 x 14 2111014
Important Notice
4 x 4 21144 6 x 10 211610 10 x 26 2111026
All statements, technical information, and recommendations related to 3Ms products
are based on information believed to be reliable, but the accuracy or completeness is not
4 x 6 21146 8 x 10 211810 11 x 15 2111115
guaranteed. Before using this product, you must evaluate it and determine if it is suitable for
4 x 26 211426 8 x 12 211812 18 x 24 2111824 your intended application. You assume all risks and liability associated with such use. Any
statements related to the product which are not contained in 3Ms current publications, or
5 x 8 21158 10 x 12 2111012
any contrary statements contained on your purchase order shall have no force or effect unless
expressly agreed upon, in writing, by an authorized officer of 3M.
* RoHS 2011/65/EU Compliant means that the product or pa rt does not contain any of the substances in excess of the maximum
concentration values (MCVs) in EU RoHS Directive 2011/65/EU. The MCVs are by weight in homogeneous materials. This
information represents 3Ms knowledge and belief, which may be based in whole or in part on information provided by third party
Warranty; Limited Remedy; Limited Liability.
suppliers to 3M.
This product will be free from defects in material and manufacture for one year from the
In the event any product is proven not to conform with 3Ms Regulatory Information, then 3Ms entire liability and Buyers exclusive
time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT
remedy will be in accordance with the Warranty section.
LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS
**Lead-free means that the product has less than 2 ppm of lead when tested by ICP-AES, with reference to EPA method
FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period
3051A/3052.
stated above, your exclusive remedy shall be, at 3Ms option, to replace or repair the 3M
product or refund the purchase price of the 3M product. Except where prohibited by law, 3M
3
will not be liable for any indirect, special, incidental or consequential loss or damage arising
from this 3M product, regardless of the legal theory asserted.
Electronic Solutions Division
Static Control Products
926 JR Industrial Drive
Sanford, NC 27332-9733
Toll-Free: 866-722-3736
International: 919-718-0000 Please recycle. Printed in USA.
Email: 3mstaticinfo@mmm.com 3M 2013. All rights reserved.
www.3Mstatic.com 98-0799-1142-0 JHA