Static Shielding Bag 1000 Series This transparent metal-in static shielding bag is designed to provide a static Meets ANSI/ESD S20.20, Packaging standard ANSI/ESD S541, and safe environment for sensitive electronic devices. Bags are printed with an Static Control Bag ANSI/ESD S11.4 Level 3 ESD protective symbol and a lot code for traceability. Open top (1000) and Physical Typical Value Testing Method ZipTop (3000) styles are available. The bags are heat sealable. Tensile Strength 4600 PSI, 32 MPa ASTM D882 SCS Static Shielding Bags 1000 are manufactured from a polyester, metal, polyethylene laminate. The polyester dielectric in concert with the metal layer Puncture Resistance 12 lbs, 53 N MIL-STD-3010C Method provides discharge shielding. The exterior being static dissipative allows 2065 electrostatic charges to be removed when grounded. Seal Strength 11 lbs, 48 N ASTM D882 Open Top Bag ZipTop Bag Open Top Bag ZipTop Bag Thickness 2.8 mils, 0.071 mm +/-10% MIL-STD-3010C Method 1003 Marking Adhesion Pass IPC-TM-650 2.4.1 Transparency 40% Tobias Electrical Typical Value Testing Method ESD Shielding <10 nJ ANSI/ESD STM11.31 4 11 Surface Resistance - 1 x 10 to < 1 x 10 ohms ANSI/ESD STM11.11 Interior 11 Surface Resistance - < 1 x 10 ohms ANSI/ESD STM11.11 Exterior Cleanliness Typical Value Testing Method Tolerance (inches): Width -0, +0.250 Length +/- 0.125 Oset O to 0.250 ff Tolerance: Width -0, +1/4 Note: Standard bag markings shown above and Silicone Not Detected FTIR Seal width +/- 0.125 Length +/- 1/8 Offset 0 to 1/4 are not to scale. Seal width 3/8 with a tolerance of +/- 1/8 Heat Sealing Conditions Typical Value Temperature 300F 375F, 149C 190C Time 0.5 3.5 seconds Pressure 30 70 PSI, 206 482 KPa Bag is free of amines, silicones and heavy metals. This product is intended for commercial use only. This product is not on the Qualiefi d Product Listing under the Defense Standardization Program. RoHS 2, REACH, and Conflict Minerals Statement None of the RoHS 2 restricted materials or REACH substances of very high concern as Made in the of 2014/12/17, or Conflict Minerals are intentionally added in manufacturing this product. Specifications and procedures subject to change without notice. United States of America Ref: European Union Directive 2011/65/EU and Regulation (EC) No. 1907/2006/CE. See SCS Warranty, Limitation of Liability and Remedies 1000 SERIES STATIC SHIELDING BAG DRAWING DATE 926 JR Industrial Drive, Sanford, NC 27332 WEB SITE: StaticControl.com NUMBER June PHONE (919) 718-0000 2015 1000 Series 2015 DESCO INDUSTRIES INC. Employee OwnedX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for scs manufacturer: Other Similar products are found below : 7001024 732 8810 963E-X 2220 2383 960 1/6PLDES1200 AMWS61M 2205 4270-9R AFM2436L1VGR-F 1001018 100618 230811 8021 SV-CS1 724-PSEU 770760 770758 2384 AFM36720L1VGR AMWS CTA101 CGC151M 150812 SAR-L LABELDISPNSR SV- SH33 81768 770069 770067 770077 8203 15058 1PLDES300 2126R 24X125 CTM048-21 8253 8204 SAR-S 150Z46 130068 817912 CTA212 81748 CTM051 300630 8264 SAR-M