Description Made in the Dissipative Yellow Bottle with swan neck spout United Kingdom Promotes ESD control awareness Used to hold water for wetting sponges at soldering stations, to hold cleaning agents or similar liquids Simply squeeze the bottle to release some contents through the spout. 9 No Migratory Additives - reduces the chance for contamination from the bottle (228mm) LDPE durAstatic bottles are dissipative electrostatic charges are removed to ground when handled by a grounded operator or in contact with ESD worksurface Highly visible with ESD protective symbol, allowing people to immediately know the bottle is 1 5 / 2 ESD protective (140mm) Available in 8 or 16 ounce Bottle Specifications 4 11 Bottle volume resistance 1 x 10 to < 1 x 10 ohms per ANSI/ESD STM11.12 Meets ANSI/ESD S20.20, EN 61340-5-1, ANSI/ESD S541 and EN 61340-5-3 35359 35436 35436 Material = LDPE Material = LDPE Size = 8 oz. (240mL) Size = 16 oz. (480mL) Base Diameter = 2-1/4 (57mm) Base Diameter = 2.9 (74mm) Neck Size = 28-400 Neck Size = 28-400 Height = 7-3/4 (197mm) Height = 9 (228mm) 3 7 / 4 35359 8 oz. (240mL) Bottle, Dissipative LPDE, Yellow (197mm) 35436 16 oz. (480mL) Bottle, Dissipative LPDE, Yellow It should be understood that any object, item, material or person could be a source of static electricity in 1 the work environ-ment. Removal of unnecessary nonconductors, replacing nonconductive materials with 4 / 4 dissipative or conductive materials and grounding all conductors are the principle methods of controlling (108mm) static electricity in the workplace, regardless of the ac-tivity. ESD Handbook ESD TR20.20 section 2.4 Sources of Static Electricity If not otherwise noted, tolerances 10% Specifications and procedures subject to change without notice. 35359 durAstatic Dissipative Wash Bottles 3651 WALNUT AVE., CHINO, CA 91710 DATE: DRAWING NUMBER PHONE: (909) 627-2453 May 35359 WEBSITE: MendaPump.com 2016 2016 DESCO INDUSTRIES INC. Employee Owned