35694 Desco

Characteristics: Brushes minimize static charge generation and remove electrostatic charges to ground when held by grounded personnel Conductive copper based nylon bristles mixed with natural materials Available in 3 kinds of bristles soft, sem-firm, and firm Semi-firm and soft bristles are ideal for chemical and electronics applications Firm bristles are mainly for electronics, especially circuit boards Conductive carbon loaded polypropylene handle Conductive handles ESD properties are not effected by humidity as are wooden handle brushes 3 5 RTT Resistance: 1 x 10 to <1 x 10 ohms tested per modified ANSI/ESD S4.1 Materials: Firm bristles - conductive yarn and hog hair* Semi-fine bristles - conductive yarn and horse hair* Soft Bristles - conductive yarn and goat hair* 35690 35691 35692 35693 35694 35696 *Natural animal hair has potential to shed Handle Bristle Overall Overall Bristle Bristle Item Bristle Length Type Hardness Length Width Width Height 35690 Round Firm 6 (152 mm) 5/16 (8 mm) 7/16 (11 mm) 3/16 (5 mm) 3/16 (5 mm) 35691 Long Firm 6 (152 mm) 1/2 (13 mm) 11/16 (17 mm) 1-1/4 (32 mm) 1/4 (6 mm) 35692 Long Firm 7 (178 mm) 1/2 (13 mm) 10/16 (16 mm) 2-3/8 (60 mm) 5/16 (8 mm) 35693 Flat Firm 6-1/4 (159 mm) 2-1/8 (54 mm) 3/4 (19 mm) 2 (51 mm) 3/16 (5 mm) 35694 Flat Semi-Fine 5-1/4 (133 mm) 5/16 (8 mm) 13/16 (21 mm) 1/2 (13 mm) 3/16 (5 mm) 35695 Curved Firm 4 (102 mm) 2-1/2 (64 mm) 1 (25 mm) 3 (76 mm) 1 (25 mm) 35696 Flat Firm 5-1/8 (130 mm) 5/16 (8 mm) 10/16 (16 mm) 1/2 (13 mm) 3/16 (5 mm) 36086 Flat Firm 5-3/4 (146 mm) 7/8 (22 mm) 3/4 (19 mm) 3/4 (19 mm) 3/16 (5 mm) 36087 Flat Firm 5-3/4 (146 mm) 1-1/16 (27 mm) 3/4 (19 mm) 7/8 (22 mm) 3/16 (5 mm) 35695 36086 36087 36088 36098 36088 Flat Firm 6-1/4 (159 mm) 1-5/8 (41 mm) 3/4 (19 mm) 1-1/2 (38 mm) 3/16 (5 mm) Designed to fulfill ANSI/ESD S20.20 requirement to ground all conductors 36098 Round Soft 6-5/16 (160 mm) 3/16 (5 mm) 1 (25 mm) 1/4 (6 mm) 1/4 (6 mm) at ESD workstation. Dimensions are taken from the bottom of the brush to the top of the bristles. ESD Handbook TR20.20 Table 1 lists under Typical Static Electricity Sources Brushes (camel/pig hair and synthetic bristles). Synthetic vs. Natural Bristles It should be understood that any object, item, material or person could be a Synthetic bristles can easily become charged with static in standard humidity conditions. source of static electricity in the work environment. Removal of unnecessary Natural hair usually builds static in areas of low humidity, but due to the conductive fibers in our brushes, nonconductors, replacing nonconductive materials with dissipative or conductive this problem does not take effect. materials and grounding all conductors are the principle methods of controlling Generally speaking, once the conductive yarn is added to the bristles, it neutralizes the possibility of static static electricity in the workplace, regardless of the activity. (TR 20.20 section build up caused by the natural hair. 2.4) Unless otherwise noted, tolerance is 10%. Specifications and procedures subject to change without notice. CONDUCTIVE BRUSHES Made in Israel DRAWING DATE: 3651 WALNUT AVE., CHINO, CA 91710 March NUMBER PHONE: (909) 627-2453 2021 35690 WEBSITE: MENDATools.com 2021 DESCO INDUSTRIES INC Employee OwnedX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Antistatic Control Products category: Click to view products by Desco manufacturer: Other Similar products are found below : 13020 13490 13870 13879 13881 13883 13882 14404 2202SP 3039 37061 42470 09060 09857 42516 37059 04563 17252 19691 19695 09037 09826 09813 66070 100816 68101 68103 98132 73741 13868 13485 13457 13245 13468 13420 13332 13205 13135 91070 8031 8523 66085 40931 37081 13080 13215 13806 73749 010-0225 17260