35785 Desco

Conductive D-Type Connector Cover Features: Conductive Composite Made in the Permanently volume conductive and free of carbon black particulate. The United States of America connector covers do not leave black marks and are more suited to clean situations. Meets the requirements of NASM5501 31/32. Chemical Susceptibility* Reactions Material Properties Test Method Typical Value Noncorrosive 5 Connector covers are noncorrosive and produce no visible corrosion when Dilute Acids Slight Attack Resistivity ASTM D991 <10 ohm-cm tested to Federal Test Method 101C using Kovar test plates. Dilute Alkalines Slight Attack Contact Corrosivity FTM 101C Pass Method 3005 Conformability Concentrated Acids Slight Attack (Kovar plate) The material used in the covers was selected for its resilience. Properly Concentrated Alkalines Slight Attack Elongation ASTM D638 24% sized, the covers provide a snug, secure fit. This helps keep connectors Methanol, Ethanol, and Resistant clean and prevents the cover from accidentally falling off. Tensile ASTM D638 2700 psi Isopropanol Vicat Softening ASTM MD 85 C Hydrocarbons Slight Attack 1525 Ketones Slight Attack Outgassing ASTM E595 Pass Oil and Gasoline Slight Attack *ASTM F925 Part No. Size Contacts Connector Shell A B C D E F G H Type Size 35780 15P 15 Pin A/2 1.040 1.107 1.177 .512 .436 .369 .280 .240 35781 15S 15 Socket A/2 .955 1.022 1.122 .462 .362 .295 .280 .240 35782 25P 25 Pin B/3 1.586 1.635 1.735 .530 .430 .363 .280 .240 35783 25S 25 Socket B/3 1.495 1.562 1.662 .462 .362 .295 .280 .240 35784 37P 37 Pin C/4 2.216 2.283 2.383 .530 .430 .363 .280 .240 35785 37S 37 Socket C/4 2.143 2.210 2.310 .462 .362 .295 .280 .240 35786 50P 50 Pin D/5 2.112 2.179 2.279 .636 .536 .469 .280 .240 35787 50S 50 Socket D/5 2.049 2.116 2.216 .574 .474 .407 .280 .240 35788 9P 9 Pin E/1 .708 .775 .849 .512 .434 .367 .280 .240 35789 9S 9 Socket E/1 .627 .694 .794 .462 .362 .295 .280 .240 Packaged 100/pack, 10 packs/case NSN No. & MIL Spec located here Unless otherwise noted, tolerance 10% Specifications and procedures subject to change without notice. It should be understood that any object, item, material or person could be a source of static electricity in the work environment. Removal of unnecessary nonconductors, replacing nonconductive materials with dissipative or conductive materials and grounding all conductors are the principle methods of controlling static electricity in the workplace, regardless of the activity. ESD CONDUCTIVE D-TYPE CONNECTOR COVERS Handbook ESD TR20.20 section 2.4 Sources of Static Electricity 3651 WALNUT AVE., CHINO, CA 91710 DATE: DRAWING NUMBER PHONE: (909) 627-2453 October 35780 WEBSITE: MendaPump.com 2020 2020 DESCO INDUSTRIES INC Employee OwnedX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for D-Sub Tools & Hardware category: Click to view products by Desco manufacturer: Other Similar products are found below : 000-01-09-132 000-01-21-132 000-01-31-162 572019-00105-70 000-01-37-162 621-250-113-115 D110550-2 D20418-137 780-518-50SG6- WS 86552009 86553115TLF 86553117TLF 1230032-1 1-5021101-2 1589283-4 160-000-005R031 16-000230 160-025-004R031 160-020- 209R000 160X10909X 164C03939A 177-505-A-2-2 1-966830-8 21018-6 2-1393560-9 JS-1000 L17D204182M3E L17D53018 300X10779X 160X10189X 160X10419X 162-000-050R000 21018-5 212561-3 248C21550X CF15P D110277 D20418-135 500- 008NF1K-01 500-008NF3R3KS-01 500-017M09FN 500-017M15MHN 500-024M1 500-068M3 5-1393561-5 C115373-0001 C115373- 0002 3342-4-KIT K1003 L17D4M68711