Item Size - x x T Snap 37670 11-3/4 x 35-1/2 x 1/16 Male 39780 11-3/4 x 35-1/2 x 1/16 Female 37672 11-3/4 x 59-1/2 x 1/16 Male 39787 11-3/4 x 59-1/2 x 1/16 Female 37673 17-1/2 x 35-1/2 x 1/16 Male 39792 17-1/2 x 35-1/2 x 1/16 Female 37676 23-1/2 x 35-1/2 x 1/16 Male Pro-mat shown being used on 39858 23-1/2 x 35-1/2 x 1/16 Female shelving and as a worksurface 37674 23-1/2 x 47-1/2 x 1/16 Male Features 6 9 39796 23-1/2 x 47-1/2 x 1/16 Female Rtt 1 x 10 < 1 x 10 ohms, meets worksurface recommendation of ANSI/ESD S4.1 Economical ESD worksurface or shelving 37675 23-1/2 x 59-1/2 x 1/16 Male Meets required limits of ANSI/ESD S20.20 for worksurface and for shelving 39800 23-1/2 x 59-1/2 x 1/16 Female Low charging antistatic, dissipative surface Custom sizes available. Ask for quote. Includes two 10mm (3/8) male stud or female socket grounding snaps Chemical resistant RoHS, REACH, and Conflict Minerals Statement: See the Desco Industries ROHS, Reach and Conflict Minerals Statement Great choice for shelves and transportation carts, or for messy soldering applications Descoindustries.com/ROHS3.aspx Impregnated material greater durability Made from 100% recycled material, and is 100% recyclable See the Protektive Pak Limited Warranty Protektivepak.descoindustries.com/Limited-Warranty.aspx Made in United States of America Meets the required limits of ANSI/ESD S20.20, Packaging standard ANSI/ESD S541, and worksurface standard ANSI/ESD S4.1 SPECIFICATIONS Properties Typical Values Test Procedures/Method 6 9 Surface Resistance 1 x 10 to < 1 x 10 ohms ANSI/ESD STM11.11 Sloughing Test Negligible surface damage at 10 cycles and <5% of surface ASTM D4060 at 70 rpm with CS-17 abrasive-coated damage at 200 cycles in Taber Abrasion Test. wheels and 1000 grams load No conductive particles abrased from surface Rockwell International Test Report of January 8, 1992 Recyclability Complete recyclability of package Rockwell International Test Report of January 8, 1992 The most important functional consideration for worksurfaces is the resistance from the top of the surface to the groundable point. This establishes the resistance of the primary path Made in the to ground for items placed on the surface. When worksurface materials are being selected, Specifications and procedures subject to change without notice. United States of America consideration should be given to possible CDM damage to ESD sensitive products. If CDM damage is a concern, then setting a lower resistance limit for the worksurface should be 6 considered. Typically, the lower limit for these types of worksurfaces is 1 x 10 ohms. PRO-MATS ESD Handbook ESD TR20.20 Worksurface section 5.3.1.7 Electrical Considerations PROTEKTIVE PAK DATE: 13520 MONTE VISTA AVENUE, CHINO, CA 91710 DRAWING NUMBER December PHONE (909) 627-2578 37670 ProtektivePak.com 2018 2018 DESCO INDUSTRIES INC Employee OwnedX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Antistatic Control Products category: Click to view products by Desco manufacturer: Other Similar products are found below : 13020 13490 13870 13879 13881 13883 13882 14404 2202SP 3039 37061 42470 09060 09857 42516 37059 04563 17252 19691 19695 09037 09826 09813 66070 100816 68101 68103 98132 73741 13868 13485 13457 13245 13468 13420 13332 13205 13135 91070 8031 8523 66085 40931 37081 13080 13215 13806 73749 010-0225 17260