Round Containers with Covers Data Sheet These Velostat containers are injection-molded in a variety of shapes and sizes. They are ideal for static- safe storage, kitting, and in-process handling and transporting of static-sensitive assemblies and devices. Product No. Diameter Height 4011 2.38 (6,0 cm) 0.88 (2,2 cm) 4012 3.38 (8,6 cm) 0.88 (2,2 cm) 4013 1.81 (4,6 cm) 4.0 (10,2 cm) 4014 4.06 (10,3 cm) 2.34 (6,0 cm) 4015 3.81 (9,7 cm) 4.69 (11,9 cm) All dimensions are referenced from the inside bottom of the container and are nominal dimensions.Typical Property Test Method 4550 Compound / 4520 Compound / 1801 Sheet Stock 1840 Sheet Stock Typical Value * Typical Value ** Hardness ASTM D2240 58-62 Shore D 67-71 Shore D Heat Deflection Temp. ASTM D648 38- 43C 264 psi 100C 66 psi 50C 264 psi Water Absorbtion ASTM 570 .1 - .2% .1 - .2% Vicat Softening ASTM D1525 88- 92C 148C Flammability ASTM D635 4.5 - 5.5 cm/min 2 cm/min Thermal Conductivity ASTM C117 .15 - .25 BTU/hr*ft2*F/ft 0.19 BTU/hr*ft2*F/ft Impact Resistance ASTM D256 2.9 - 3.7 ft-lbs/in 72F 8 - 10 ft-lbs/in 72F Notched Izod 0.6 - 1.3 ft-lbs/in 25F 7 - 9 ft-lbs/in 25F Maximum Temp. Exposure 3M 150F 180F Tensile Strength ASTM D638 1700 - 2000 psi 2800 - 3000 psi Flex Modulus ASTM D790 40,000-50,000 psi 130,000-150,000 psi Mold Shrinkage ASTM 955 15 - 20 mil/in 10 - 20 mil/in Electrical Conductance Volume Conductive ASTM D991 < 500 ohms/cm < 500 ohms/cm Chemical Resistance ASTM D543 Alcohol Resistant Resistant Aromatic Hydrocarbons Severe Attack Severe Attack Aliphatic Hydrocarbons Moderate Attack Moderate Attack Concentrated Acids Slight Attack Slight Attack Concentrated Alkalines Slight Attack Slight Attack Dilute Acids Resistant Resistant Dilute Alkalines Resistant Resistant Kerosene Severe Attack Severe Attack Keytones (Acetone) Moderate Attack Moderate Attack Mineral Oil Slight Attack Slight Attack Oil and Gasoline Moderate Attack Moderate Attack *Velostat polyethylene technical data for 4550 Resin 1801 4251-4254ASnap on Covers. **Velostat polypropylene technical data for 4520 Resin 1840 4011-4016 Round Containers and Lids 4021-4025 Hinged Containers 4031-4032 (tray only) 4061-4063 Trays 4321-4333ASlip-in Dividers 4400ASeries Tote Boxes and 4215-4236AInsert Covers 4430-4431 Trays and 4420-4421 Covers 4451-4457 Parts Bin 4458-4459 Parts Drawer and Divider 5701 Single Device Carriers and 8520-8523 Single Card Carriers. Limited Warranty 3M expressly warrants that for a period of one year from the date of purchase, 3M static control products will be free of defects in materials (parts) and workmanship (labor). Defects occurring during the warranty period will be repaired or products will be replaced at 3Ms option and expense, if 3M receives notice during the warranty period. Defective products must be returned to 3M with proof of purchase date. Warranty Exclusions THE FOREGOING EXPRESS WARRANTYIS MADE IN LIEU OF ALLOTHER PRODUCT WARRANTIES, EXPRESS AND IMPLIED, INCLUDING FITNESS AND MERCHANTIBILITY. The express warranty will not apply to defects or damage due to accidents, neglect, misuse, alterations, operator error, or failure to properly maintain, clean, or repair products. Limit of Liability In no event will 3M or Seller be responsible or liable for special, incidental, or consequential losses or damages, whether based in tort or contract. Fulfillment of 3Ms warranty obligations will be Customers exclusive remedy and 3Ms and Sellers limit of liability for any breach of warranty or otherwise. For your nearest distributor or to order, call 1-800-328-1368 Electronic Handling & Protection Division 6801 River Place Blvd. Austin, TX 78726-9000 3M December 1996