Description: Statfree T2 meets the worksurface requirements of ANSI/ESD S20.20 and recommendation of ESD S4.1. This material is a dual purpose rubber matting material. The two layer construction allows it to be used as a dissipative or a conductive matting product. The soft dissipative layer makes an excellent table mat, ideal for use in soldering and assembly areas. This rubber material has superior resistance to heat, abrasion, chemicals, and is easy to clean and maintain. Statfree T2 material will not melt and does not burn when coming into contact with hot metal parts or soldering debris. It is amine, chloride, sulfide, alumina, and magnesia free. Statfree T2 is suitable for use with continuous monitors. The green material identifies the worksurface as a Lead-Free work zone. See illustration on the reverse side. Statfree T2 is manufactured without any ozone depleting substances, and is in accordance with the Montreal Protocol. Electrical Properties: Property Test Method Value 6 8 GREEN RTT Resistance: ESD S4.1 10 - 10 Ohms 7 8 RTG Resistance: ESD S4.1 10 - 10 Ohms Disclaimer: All statements, technical data, and recommendations Charge Decay: FTMS 101C, Method 4046 0.01 seconds contained herein are based upon tests we believe to be reliable. However, the accuracy or completeness Electrical Properties obtained by testing to industrial standards by an independent testing laboratory 100 Volts and 50% relative humidity thereof is not guaranteed. The proper and correct unless otherwise specified. Complete text of the test report is available upon request. applications of products and data is the responsibility of the user. Statements or recommendations not contained herein shall have no force or effect unless RoHS Compliance Statement embodied in a written agreement signed by None of the following materials are intentionally added authorized offers of Desco Industries, Inc. in manufacturing this product: lead, mercury, cadmium, Specifications: hexavalent chromium, polybrominated biphenyls (PBB) Limited Lifetime Warranty: Construction: Dual-layer rubber material, lead-free or polybrominated diphenyl ethers (PBDE) as outlined in Desco warrants for one year that Thickness: 0.060 (1.5mm) the Directive 2002/95/EC Article 4.1. See Desco Statfree matting products will be free Color:* Green (top), Black (bottom) Industries Inc. letter on-line at Desco.com. of defects in materials and workman- Texture:* Slight embossed ship and will guarantee dissipative/ 2 Weight: 0.43 lbs./sq. ft. (0.2g/cm ) conductive mat properties for the life of Hardness: 65 5 Shore A, per ASTM-D2240 the mat. Damage to matting caused by Heat Resistance: Does not melt or burn when coming into contact with hot solder and soldering irons. misuse of any kind, including using Chemical Resistance: Resistance to degradation by inorganic acids, organic acids, reducing agents, aliphatic hydrocarbons, mineral oil, inappropriate cleaners is not covered aldehydes, and amines by Desco Limited Warranty. *Color and texture may vary between lots and mills Tolerances: Grounding: This material must be properly grounded for optimum electrical performance. Ask for Technical Bulleltin TB-2000 for mat Width +/- .250 grounding instructions. Length +/- .250 every 1 Cleaning: Use only ESD mat cleaner such as Reztore Surface & Mat Cleaner to clean and extend mat useful life. Do not use cleaners linear foot of running material. contaiing silicone as silicone will create an insulative film on the surface. Do not use solvent based cleaners as solvents will dry out matting and may cause curling. See reverse side for available STATFREE T2 MATERIAL, LEAD-FREE, DISSIPATIVE, RUBBER, mat and roll sizes. Made in America 2-LAYER, 0.060 (1.5mm) DESCO WEST: 3651 WALNUT AVE., CHINO, CA 91710 WEB SITE: www.desco.com MATERIAL STATFREE T2 PHONE (909) 627-8178 FAX (909) 627-7449 DATE: DESCO EAST: 90 HUDSON RD, CANTON, MA 02021-1407 2/06 DRAWING PM-122 PHONE (781) 821-8370 FAX (781) 575-0172 2006 DESCO INDUSTRIES INC. Employee OwnedItem Number Reference For StatfreeT2 Lead-Free Rubber, Dissipative, 2-Layer KITS LLeeaadd-FFrreeee WWoorrkkssttaattiioonn Mat Top Kit Item Numbers Statfree T2 Lead-Free Rubber is laser engraved with SIZE GREEN Look for the Statfree Lead-Free Workstation brand on Desco ESD 24 x 36 66057 to designate the area as free of lead. matting. All Desco mat top 24 x 48 66058 kits are permanently marked for your protection and auditing purposes. MAT TOP KIT INCLUDES 1 Benchmat, Statfree T2, size as specified 1 14213, Common point kit w/snap, customer installed ROLL Roll Stock Item Numbers 0.060 (1.5mm) SIZE GREEN STOCK THICK ROLLS 24 x 24 66120 Statfree T2 Is Also 30 x 24 66121 Available In 36 x 24 66122 Full 48 x 24 66123 Rolls Hardware is not included with rolls. Grounding Intervals for ESD Mats Sufficient ground cords should be used to reliably meet ANSI/ESD S20.20 Table 1 less than 1 x 10E9 ohms for Matting materials have a tendency to shrink slightly when first unrolled. In applications where worksurfaces. An industry recommendation has been that length is critical, allow the material to relax for at least 4 hours before cutting to size. Always continuous runs of ESD matting should be grounded at ten- trim with a sharp knife or razor blade. foot intervals to allow proper charge decay rates with each individual ESD mat should be grounded with ground snap located no further than five feet from either end. 2006 DESCO INDUSTRIES INC. Employee Owned