Meets ANSI/ESD S20.20, Packaging standard ANSI/ESD Moisture Barrier Bag Dri-Shield 2000 S541, and Static Control Bag ANSI/ESD S11.4 Level 3 This aluminized moisture barrier bag is designed to provide packaging for ESD (except Transparency) Made in the United States of America and moisture sensitive items, both inside and outside an ESD protected area. The bags are heat sealable and suitable for vacuum packaging. Bags are printed Physical Typical Value Testing Method with ESD and moisture warning symbols and a lot code for traceability. Moisture Vapor <0.035 grams/100 sq. in./24 hrs MIL-STD-3010C Method 3030 Transmission Rate SCS Moisture Barrier Bags Dri-Shield 2000 are manufactured from a (MVTR) laminate of multiple layers of aluminized polyester and polyethylene. Polyester Tensile Strength 7800 PSI, 54 MPa ASTM D882 provides puncture resistance. Metal layers are intended to provide shielding of Electrostatic Discharge (ESD) and to help minimize the penetration of electric Puncture Resistance 20 lbs, 89 N MIL-STD-3010 Method 2065 field while providing moisture protection. Seal Strength 15 lbs, 66 N ASTM D882 OPENING Thickness 3.6 mils, 0.0914 mm 10% MIL-STD-3010 Method 1003 OFFSET Marking Adhesion Pass IPC-TM-650 2.4.1 Electrical Typical Value Testing Method Tolerance: Width -0, +1/4 Length 1/8 Offset 0 to 1/4 ESD Shielding <10 nJ ANSI/ESD STM11.31 Seal width 3/8 with a tolerance of 1/8 4 11 Surface Resistance - ANSI/ESD STM11.11 1 x 10 to < 1 x 10 ohms Moisture Barrier Bag DRI-SHIELD 2000 Interior Note: Standard bag markings shown Discharge Shielding above are not to scale. 4 11 Surface Resistance - ANSI/ESD STM11.11 1 x 10 to < 1 x 10 ohms LENGTH SEAL Exterior 7 11 ATTENTION: Contents may be OTHER PET/ALU/PE EMI Attenuation 45 dB 1 to 10 GHz Moisture and Static Sensitive Cleanliness Typical Value Testing Method LOT 32910987654321 ** Bags are printed (hot stamp or thermal) with an ESD Silicone Not Detected FTIR protective symbol and a lot code for traceability. ** Heat Sealing Conditions Typical Value FOLD Temperature 300F - 400F, 140C - 204C Time 0.6 4.5 seconds SEAL WIDTH WIDTH Pressure 30 70 PSI, 206 482 KPa STATIC DISSIPATIVE POLYESTER Bag is free of amines, silicones and heavy metals. ALUMINUM SHIELD This product is intended for commercial use only. This product is not on the Qualified Product POLYESTER Listing under the Defense Standardization Program. ALUMINUM SHIELD NOTE: The complete dry package concept of packaging for electronics requires three elements: STATIC DISSIPATIVE Moisture Barrier Bags - To Protect POLYETHYLENE SCS Moisture Barrier Bags are packaged in a polyethylene bag. Desiccants - To Absorb Moisture RoHS, REACH, and Conflict Minerals Statement Humidity Indicator Cards - To Monitor Performance See the SCS RoHS, REACH and Conflict Minderals Statement: X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Antistatic Control Products category: Click to view products by Desco manufacturer: Other Similar products are found below : 13020 13490 13870 13879 13881 13883 13882 14404 2202SP 3039 37061 42470 09060 09857 42516 37059 04563 17252 19691 19695 09037 09826 09813 66070 100816 68101 68103 98132 73741 13868 13485 13457 13245 13468 13420 13332 13205 13135 91070 8031 8523 66085 40931 37081 13080 13215 13806 73749 010-0225 17260