Moisture Barrier Bag Dri-Shield 2000 Made in the This aluminized moisture barrier bag is designed to provide packaging for ESD United States of America and moisture sensitive items, both inside and outside an ESD protected area. Meets ANSI/ESD S20.20, Packaging standard ANSI/ESD S541, and Static Control Bag The bags are heat sealable and suitable for vacuum packaging. Bags are ANSI/ESD S11.4 Level 3 (except Transparency) printed with ESD and moisture warning symbols and a lot code for traceability. Physical Typical Value Testing Method Moisture Vapor <0.035 grams/100 sq. in./24 hrs MIL-STD-3010C Method 3030 SCS Moisture Barrier Bags Dri-Shield 2000 are manufactured from a Transmission Rate laminate of multiple layers of aluminized polyester and polyethylene. Polyester (MVTR) provides puncture resistance. Metal layers are intended to provide shielding of Electrostatic Discharge (ESD) and to help minimize the penetration of electric Tensile Strength 7800 PSI, 54 MPa ASTM D882 field while providing moisture protection.Open Top Bag ZipTop Bag Puncture Resistance 20 lbs, 89 N MIL-STD-3010 Method 2065 Seal Strength 15 lbs, 66 N ASTM D882 Thickness 3.6 mils, 0.0914 mm 10% MIL-STD-3010 Method 1003 Marking Adhesion Pass IPC-TM-650 2.4.1 Electrical Typical Value Testing Method ESD Shielding <10 nJ ANSI/ESD STM11.31 4 11 Surface Resistance - ANSI/ESD STM11.11 1 x 10 to < 1 x 10 ohms Tolerance: Width -0, +1/4 Interior Length 1/8 Offset 0 to 1/4 Seal width 3/8 with a tolerance of 1/8 4 11 Surface Resistance - ANSI/ESD STM11.11 1 x 10 to < 1 x 10 ohms Exterior Note: Standard bag markings shown above are not to scale. EMI Attenuation 45 dB 1 to 10 GHz Cleanliness Typical Value Testing Method Silicone Not Detected FTIR Heat Sealing Conditions Typical Value Temperature 300F - 400F, 140C - 204C Tolerance (inches): Width -0, +0.250 Length +/- 0.125 Oset O to 0.250 ff Time 0.6 4.5 seconds Seal width +/- 0.125 Pressure 30 70 PSI, 206 482 KPa Bag is free of amines, silicones and heavy metals. This product is intended for commercial use only. This product is not on the Qualified Product Listing under the Defense Standardization Program. NOTE: The complete dry package concept of packaging for electronics requires three elements: Moisture Barrier Bags - To Protect SCS Moisture Barrier Bags are packaged in a polyethylene bag. Desiccants - To Absorb Moisture RoHS 2, REACH, and Conflict Minerals Statement Humidity Indicator Cards - To Monitor Performance None of the RoHS 2 restricted materials or REACH substances of very high concern as of 2017/01/12, or Conflict Minerals are intentionally added in manufacturing this product. Specifications and procedures subject to change without notice. Ref: European Union Directive 2011/65/EU and Regulation (EC) No. 1907/2006/CE. See SCS Warranty, Limitation of Liability and Remedies DRI-SHIELD 2000 MOISTURE BARRIER BAG DRAWING DATE 926 JR Industrial Drive, Sanford, NC 27332 WEB SITE: StaticControl.com NUMBER April PHONE (919) 718-0000 2017 Dri-Shield 2000 2017 DESCO INDUSTRIES INC. Employee Owned