Properties Typical Value Test Method R3 Dissipative Rubber Worksurface Mat Meets ANSI/ESD S20.20 worksurface required limit (and Thickness* 0.060 to 0.070 (1.5 mm to 1.8 mm) recommendation of ANSI/ESD STM4.1-2017) tested per ANSI/ESD STM4.1-2017 and ESD TR53. Resistance to solvents, hot solder Color* Light Blue/Black Dark Blue/Black and soldering irons makes the R3 Dissipative Rubber Worksurface Gray/Black Mat a versatile static-safe worksurface. Electrical performance is Green/Black accomplished by using a two-layer rubber combination of a static Corner Radius 3/4 (Tray Liners only) dissipative colored top with a conductive black bottom. Compatible with Continuous Workstation Monitors. Available in rolls, tray liners, Resistances 6 9 Surface to Ground (Rtg) 1 x 10 to < 1 x 10 ohms ANSI/ESD STM4.1-2017, ESD TR53 and mat kits. 6 9 Surface to Surface (Rtt) 1 x 10 to < 1 x 10 ohms ANSI/ESD STM4.1-2017, ESD TR53 Light Blue Hardness 65 5 Shore A ASTM-D2240 Tolerance Dark Blue Mat Kit Width +/- 0.250 (6.3 mm) Length +/- 1 (25.4 mm) Rolls Width +/- 0.250 (6.3 mm) Gray Length +/- 2 (50.8 mm) Mat Kits Item Numbers Green Size Light Blue Gray Green 24 x 48 (0.6 m x 1.2 m) 770074 770090 770085 Table Mat Kits include: 1 Table Mat, size as specified Mat Kits are laser engraved for 1 LPCGC151M 15 (4.6 m) Ground Cord branding and auditing purposes. 2 3049 Snap Kit Mat Roll Item Numbers RoHS, REACH, and Conflict Minerals Statement Size Light Blue Dark Blue Gray Green See the Desco Industries RoHS, REACH, and Conflict Minerals Statement: DescoIndustries.com/ROHS3.aspx 18 x 50 (0.45 m x 15.2 m) 770078 770077 See the SCS Limited Warranty: 24 x 50 (0.6 m x 15.2 m) 770070 770091 770086 770081 StaticControl.DescoIndustries.com/Limited-Warranty.aspx 30 x 50 (0.8 m x 15.2 m) 770071 770092 770087 770082 Grounding: This material must be properly grounded for optimum electrical 36 x 50 (0.9 m x 15.2 m) 770072 770093 770088 770083 performance. See Grounding Cords. 48 x 50 (1.2 m x 15.2 m) 770073 770089 770084 Cleaning: For optimum electrical performance, surface must be cleaned regularly using Includes roll of matting material. a recommended ESD mat cleaner. Do not use cleaners with silicone. Silicone buildup will create an insulative film on the surface. Tray Liner Item Numbers Size Light Blue Dark Blue Gray Green *Color, texture and thickness may vary between lots and mills. Matting materials have a tendency to shrink slightly when first unrolled. In applications 16 x 24 (0.4 m x 0.6 m) 770096 770097 770098 770099 where length is critical, allow the material to condition for at least 4 hours before cutting Made in the Includes matting material only. to size. Always using care, trim with a sharp knife or razor blade. United States of America Specifications and procedures subject to change without notice. R3 DISSIPATIVE RUBBER WORKSURFACE MAT DRAWING 926 JR Industrial Drive, Sanford, NC 27332 DATE NUMBER WEB SITE: StaticControl.com June PHONE: EAST (919) 718-0000 WEST: (909) 627-9634 2020 R3 Series 2020 DESCO INDUSTRIES INC Employee OwnedX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Antistatic Control Products category: Click to view products by Desco manufacturer: Other Similar products are found below : 13020 13490 13870 13879 13881 13883 13882 14404 2202SP 3039 37061 42470 09060 09857 42516 37059 04563 17252 19691 19695 09037 09826 09813 66070 100816 68101 68103 98132 73741 13868 13485 13457 13245 13468 13420 13332 13205 13135 91070 8031 8523 66085 40931 37081 13080 13215 13806 73749 010-0225 17260