ESD Cellulose Tape For general purpose applications Meets ANSI/ESD S20.20 and packaging standard ANSI/ESD S541 Film Thickness: 1.9 mil 0.0019 , (0.06 mm) Adhesive: Rubber based - non staining, absorbs moisture 9 11 Film surface resistance: 1 x 10 to < 1 x 10 ohms per ANSI/ESD STM11.11 Temperature Range -10C to 71C (14F to 160F) 100C for 10 min max Available in clear, and clear with ESD symbols. Marking is approved symbols of Mil STD-1285** and ANSI/ESD S8.1. Symbols printed in between film and adhesive will not rub off. Manufactured in North America Tape 0.5 0.75 1 Core Length Antistatic Clear Cellulose Antistatic Clear Cellulose 780000 780001 1 36 yds with Symbols Antistatic Clear Cellulose 780002 780003 780004 3 72 yds Tape is wound on a low-sloughing plastic core. Antistatic Clear Cellulose 780005 780006 780007 3 72 yds with Symbols Wescorp Tape Storage and Limited Warranty: Width tolerance 1/32 Users shall determine the suitability of the product for its intended use. For best results, tape inventory should be continually replenished. It is recommended that rolls of tape be stored flat and rotated (flipped over to the other side) periodically. Tape widths are nominal Tapes should be stored in a dry, well ventilated room with a reasonably consistent metric 0.8 mm (1/32 ). temperature of 68F (20C) and be protected from exposure to direct sunlight. Tape Antistatic Tape should not be stored in ultraviolet sunlight, moisture, or heat. Tape over one year old 1/2 is 12 mm nominal or 0.472 should be evaluated by the user to determine acceptability for the user s application. Imprint on Clear Cellulose Desco Industries, Inc. recommends those tracking useful life of product to use 3/4 is 18 mm nominal or 0.709 with Symbols shipping/invoice date as Desco Industries, Inc. expressly warrants that for a period of 1 is 24 mm nominal or 0.945 one (1) year from the date of purchase, our Wescorp Brand ESD Tape will be free of defects in material (parts) and workmanship (labor). See details of Limited Warranty online at StaticControl.com/Warranty.aspx RoHS 2, REACH, and Conflict Minerals Statement None of the RoHS 2 restricted materials or REACH substances of very high concern as of 2014/12/17, *Wescorp is a Desco Industries brand. or Conflic t Mineral s are intentionally added in manufacturing this product. Ref: European Union Directive 2011/65/EU and Regulation (EC) No. 1907/2006/CE. See SCS Warranty, Limitation of Note: Tape rolls may vary slightly in color. Liability and Remedies **Military organizations sometimes use MIL-STD-1285 for hardware marking and that document once required the use of the three arrows in a circle symbol. That symbol has been changed for Specifications and procedures subject to change without notice. consistency with industry marking to the hand in triangle ESD Susceptibility symbol. (Ref: ESD TR20.20 section 5.3.14.1) WESCORP* ESD CELLULOSE TAPE, PLASTIC CORE DRAWING DATE 926 JR Industrial Drive, Sanford, NC 27332 WEB SITE: StaticControl.com NUMBER July PHONE (919) 718-0000 2015 780000 2015 DESCO INDUSTRIES INC. Employee OwnedX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for scs manufacturer: Other Similar products are found below : CTC331-WW 7001024 732 8810 963E-X 2220 2383 960 1/6PLDES1200 AMWS61M 2205 4270-9R AFM2436L1VGR-F 100618 230811 8021 SV-CS1 724-PSEU 770760 770758 2384 AFM36720L1VGR AMWS CTA101 CGC151M 150812 SAR-L LABELDISPNSR SV-SH33 81768 770069 770067 770077 CTM082 8203 15058 1PLDES300 2126R 24X125 3033 CTM048-21 8253 8204 SAR-S 150Z46 130068 817912 CTA212 81748 CTM051 300630