ESD High Temp Polymide Tape Used in applications masking PCB gold features for wave soldering and IR reflow ovens. Tape is wound on a plastic core ESD protective symbol is marked on the product (located on the core of the roll) per ANSI/ESD S541 Marked with manufacture information per ANSI/ESD S541 for quality control purposes Removal leaves little or no residue Static charge generation during unwind and peel off stainless steel plate application is 5 volts 50% RH 1.0 mil thick (0.001 or 0.0254 mm) Polyimide Film (DuPont Kapton or equivalent) 1.4 mil thick (0.0014 or 0.0356 mm) conductive polysiloxide adhesive 2 5 Adhesive surface resistance 1 x 10 to < 1 x 10 ohms per ANSI/ESD STM11.11 Max Temperature 260C (500F) Wescorp Tape Storage and Limited Warranty: For best results, apply to board using a rubber roller Users shall determine the suitability of the product for its intended use. For best results, tape inventory should be continually replenished. It is recommended that rolls of tape be stored flat and rotated (flipped over to the other side) periodically. Tapes should be stored in a dry, well ventilated room with a reasonably consistent temperature of 68F (20C) and be protected from exposure to direct sunlight. Tape should not be stored in Width - See Metric Note ultraviolet sunlight, moisture, or heat. Tape over one year old should be evaluated by the user to determine acceptability for the users application. Tape 0.25 0.5 0.75 1 Core Length Desco Industries, Inc. recommends those tracking useful life of product ESD High Temp Polyimide 81270 81271 81272 81273 3 36 yd to use shipping/invoice date as Desco Industries, Inc. expressly warrants Width Tolerance 1/32 that for a period of one (1) year from the date of purchase, our Wescorp Brand ESD Tape will be free of defects in material (parts) and workmanship Tape widths are nominal (labor). See details of Limited Warranty online at Desco.com RoHS, REACH, and Conflict Minerals Statement: metric 0.8 mm (1/32 ). See RoHS, REACH, and Conflict Minerals Statement at Desco.com. 1/4 is 6 mm nominal or 0.236 1/2 is 12 mm nominal or 0.472 Limited Warranty *Wescorp is a Desco Industries brand. 3/4 is 18 mm nominal or 0.709 See Descos Limited Warranty at Desco.com Note: Tape rolls may vary slightly in color 1 is 24 mm nominal or 0.945 Specifications and procedures subject to change without notice WESCORP* ESD HIGH TEMP POLYIMIDE TAPE, PLASTIC CORE DESCO WEST: 3651 WALNUT AVE., CHINO, CA 91710 DATE: DRAWING WEB SITE: Desco.com PHONE (909) 627-8178 FAX (909) 627-7449 March NUMBER DESCO EAST: ONE COLGATE WAY, CANTON, MA 02021-1407 2018 WEB SITE: Desco.com PHONE (781) 821-8370 FAX (781) 575-0172 81270 2018 DESCO INDUSTRIES INC Employee OwnedX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Adhesive Tapes category: Click to view products by Desco manufacturer: Other Similar products are found below : PF24.0W 4718 4516-1/4x36 56-YELLOW-34 X72YD 00-021200-13972-7 021200-64630 60 TAPE (1 ) 62-GRAY-12 X36YD 62-GRAY- 1 X36YD 69-1 X36YD 764-1 x36yd-Red 764-1 x36yd-White PG ASSY 926-1/4X18YD 967454-1 1194-14 X36YD 1181 19MM X 16,5 METERS 1182-7.7X10 1245-34 X18YD 1267 130C-1X15FT 130-1x10FT 1345-3/8x18yrd 1380-2 X8 E39-RS1-CA 1900-48mm 22- 1/2X36YD 2229-P-2-1/2x3-3/4 88-SUPER-34X44FT 890103N001 2670 SJ3527N-Black-1.5 x50yd EVK-TA-TM047NBH01 AD-UCUSB- DCAUD-SPL 20-1 X60YDS 2020-18mmx55m H150 3900-Blue 3939-24mmx55m 396-1 x36yd 4016-34 x36yd 4462W-12 x72yd 44- TAN-14 X90YD 4504-34x18 471-Trans-1 x36yd-Bulk 5414 34X36 C-22 35-Gray-1/2 371-Tan-48mmx50m 4008-12 X36YD