Product Data Sheet Product Data Sheet 3M Conductive Floor Mat for Hard Floors Homogeneous conductive rubber construction of the Conductive Floor Mat for Hard Part Numbers Floors ensures rapid discharge from personnel wearing heel grounders. The low profile Mats Includes mat, two snaps, installed reduces trip hazards and is preferred for use with rolling carts or chairs. This mat is reversible and compatible with 3M Constant Monitors. 48x72 inches COND4872FM Call for custom sizes. Specifications Typical Value Mat Kits Includes mat, two snaps, installed and a 15 foot ground cord 5 Resistance to Ground point (RTG)* 10 ohms 36x60 inches COND3660FM-F 5 Resistance Top to Top (RTT)* 10 ohms 48x72 inches COND4872FM-F Thickness 0.060 inches Call for custom sizes. Color Black Rolls Includes roll of matting material Tolerances Width .250 2x50 feet COND24600FM Length .250 *Tested per ESD Association Standard ANSI/ESD S7.1-2007 3x50 feet *Color and appearance of mats may vary by lot. COND36600FM *Meets the requirements of ANSI/EDS S7.1, 20-20-2007 4x50 feet COND48600FM RTG is the resistance from one point on the mats surface to the mats ground point, and is the fundamental electrical test for a mat. A proper RTG insures that a mat can conduct charge from a point on the surface to the mat ground point. ANSI/ESD S-20.20 has an 9 upper limit of <1x10 ohms. RTT is the resistance from one point on the mats surface to another point. A proper RTT insures the consistency of the mats resistance properties. Product Data Sheet Product Data Sheet 3M Conductive Floor Mat for Hard Floors 3M is a trademark of 3M Company. All other trademarks are owned by their respective companies. Important Notice All statements, technical information, and recommendations related to 3Ms products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3Ms current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty Limited Remedy Limited Liability. This product will be free from defects in material and manufacture for one year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3Ms option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3 Electronics Materials Solutions Division Static Control Products 926 JR Industrial Drive Sanford, NC 27332-9733 Toll-Free: 866-722-3736 International: 919-718-0000 Please recycle. Printed in USA. Email: 3mstaticinfo mmm.com 3M 2014. All rights reserved. www.3Mstatic.com 78-9102-1564-5 JHA