USER GUIDE TB-9023 EM Eye - ESD Event Meter Installation, Operation and Maintenance Made in the United States of America Figure 2. Using the EM Eye Meter Easy Data Logging to Memory Card The EM Eye Meter supports data logging by using a microSD card and exports to an Excel spreadsheet. Having data at hand enables quick analysis. Solutions can be decided quickly and can be measured on the spot. Figure 1. SCS CTM048-21 EM Eye - ESD Event Meter Description The SCS EM Eye - ESD Event Meter detects, counts and measures ESD events that can damage ESD items and cause tool lock-ups, erratic behavior, and parametric errors. It calculates event magnitude for Charged Device Model (CDM), Human Body Model (HBM), and Machine Model (MM). All measurements are recorded onto a microSD card for PC download. It features a touchscreen display and rechargeable lithium ion battery. Each EM Eye - ESD Event Meter is calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology (NIST) and includes a NIST certificate. User Features Figure 3. Inserting the SD card into the EM Eye Meter Touch Screen to Power ON The EM Eye Meter is designed with a modern user interface. All buttons and controls are within the display itself. With its display and touch screen, it is easier for users to quickly navigate through the features that were built into the meter. Speaker and Headphone Alarm Outputs The EM Eye Meter, with a speaker and headphones, allows flexible means for audible indications, beeping or warbling like a radio. If one is in a noisy place, a headphone jack for optional headphones can be used for clearer audio. SCS - 926 JR Industrial Drive, Sanford, NC 27332 East: (919) 718-0000 West: (909) 627-9634 Website: StaticControl.com 2021 DESCO INDUSTRIES INC TB-9023 Page 1 of 11 September 2021 Employee OwnedThe EM Eye and its accessories are available as the Attaching the Sensor Heads following item numbers: Keep in mind the following when using the modular sensor heads. Item Description BEFORE CONNECTING TO AN INPUT SOURCE, CTM048-21 EM Eye - ESD Event Meter TOUCH THE OUTSIDE SURFACE OF THE EM EYE CTC021 Replacement ESD Sensor METER INPUT CONNECTOR. THIS WILL HELP CTC113-6FT Remote ESD Sensor PREVENT ESD SHOCK TO THE METER. CTC115-6FT Remote ESD Sensor, High Temp 1. The power must be turned off when changing the sensor heads. CTS001 Replacement Antenna 2. Make sure to gently plug or unplug EM Eye Meter 770756 Power Adapter, 100-240VAC Input, and the sensor heads. 5VDC 1.0A Output, All Plugs 3. Plug or unplug the sensor heads by firmly gripping them. Then fit the sensor over the EM Eye unit. Do not grab the antenna for plugging and unplugging Packaging the sensor heads. CTM048-21 EM Eye - ESD Event Meter 4. If the antenna is separated from the sensor head, reattach it when the sensor head is securely in 1 EM Eye Meter place. 1 CTC021 ESD Event Sensor with Local Antenna 1 CTC113-6FT Remote Antenna with 6 ft. RF Cable 1 MicroSD Memory Card Attaching the Antenna 1 Power Adapter, 5VDC, with interchangeable plugs In order to avoid damaging the EM Eye Meter, (North America, UK/Asia, Europe) installation and replacement of the antenna must be 1 Carrying Case done with great care. An excessive amount of force 1 Certificate of Calibration or improper installation may permanently damage the meter. Precautions Attach the antenna to the input connector by simply Do not drop the meter. This may damage the device screwing it in by hand. and will void the warranty. Do not discharge directly into the antenna metals as DO NOT OVERTIGHTEN THE CONNECTION. Screw it may damage the input sensors and will void the in the antenna firmly but gently. Do not use any tools warranty. other than your hand to attach and detach the antenna. Be cautious in the placement of antenna and the module heads align the parts while assembling. Do not use sharp objects to touch the screen. Do not use a wrench or pliers to screw or unscrew the antenna. Use your bare hands. Do not remove the microSD card while the power is on. Turn off the meter before removing the microSD card. Do not remove the sensor heads while the power is on. Turn off the meter before removing and replacing the heads. SCS - 926 JR Industrial Drive, Sanford, NC 27332 East: (919) 718-0000 West: (909) 627-9634 Website: StaticControl.com 2021 DESCO INDUSTRIES INC TB-9023 Page 2 of 11 Employee Owned