Moisture Barrier Bag Dri-Shield 2700 Meets ANSI/ESD S20.20, Packaging standard ANSI/ESD S541, This aluminized moisture barrier bag is designed to provide a static and Static Control Bag ANSI/ESD S11.4 Level 3 (except Transparency) safe environment for sensitive electronic devices. A stronger polyester Physical Typical Value Testing Method layer helps to prevent sharp trays from puncturing the bag. The bags Moisture Vapor < 0.030 grams/100 sq. in./24 hrs MIL-STD-3010C Method 3030 are heat sealable and suitable for vacuum packaging. Bags are printed Transmission Rate with ESD and moisture warning symbols and a lot code for traceability. (MVTR) Tensile Strength 6550 PSI, 45 MPa ASTM D882 SCS Moisture Barrier Bags Dri-Shield 2700 are manufactured from a laminate of multiple layers of aluminized polyester and polyethylene. Puncture Resistance 30 lbs, 133 N MIL-STD-3010 Method 2065 Polyester provides puncture resistance. Metal layers are intended Seal Strength 20 lbs, 89 N ASTM D882 to provide shielding of Electrostatic Discharge (ESD) and to help Thickness 7 mils, 0.007 10% MIL-STD-3010 Method 1003 minimize the penetration of electric field. OPENING Marking Adhesion Pass IPC-TM-650 2.4.1 OFFSET Electrical Typical Value Testing Method ESD Shielding <10 nJ ANSI/ESD STM11.31 Tolerance: Width -0, +1/4 4 11 Length 1/8 Offset 0 to 1/4 Surface Resistance - ANSI/ESD STM11.11 1 x 10 to < 1 x 10 ohms Seal width 3/8 with a tolerance of 1/8 Interior Moisture Barrier Bag DRI-SHIELD 2700 4 11 Surface Resistance - ANSI/ESD STM11.11 Note: Standard bag markings shown 1 x 10 to < 1 x 10 ohms Discharge Shielding above are not to scale. Exterior LENGTH SEAL EMI Attenuation 45 dB 1 to 10 GHz 7 11 ATTENTION: Contents may be OTHER PET/ALU/PE Cleanliness Typical Value Testing Method Moisture and Static Sensitive ** Bags are printed (hot stamp or thermal) with Silicone Not Detected FTIR an ESD protective symbol and a lot code for LOT 48910987654321 traceability. ** Heat Sealing Conditions Typical Value Temperature 400F, 204C FOLD Time 0.6 4.5 seconds SEAL WIDTH Pressure 30 70 PSI, 206 482 KPa WIDTH HEAVY GAUGE STATIC DISSIPATIVE POLYESTER Bag is free of amines, silicones and heavy metals. This product is intended for commercial use only. This product is not on the Qualified Product ALUMINUM SHIELD Listing under the Defense Standardization Program. POLYESTER NOTE: The complete dry package concept of packaging for electronics requires three elements: ALUMINUM SHIELD Moisture Barrier Bags - To Protect HEAVY GAUGE STATIC DISSIPATIVE Desiccants - To Absorb Moisture POLYETHYLENE Humidity Indicator Cards - To Monitor Performance SCS Moisture Barrier Bags are packaged in a polyethylene bag. RoHS, REACH, and Conflict Minerals Statement See the SCS RoHS, REACH, and Conflict Minerals Statement: X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Antistatic Control Products category: Click to view products by Desco manufacturer: Other Similar products are found below : 13020 13490 13870 13879 13881 13883 13882 14404 2202SP 3039 37061 42470 09060 09857 42516 37059 04563 17252 19691 19695 09037 09826 09813 66070 100816 68101 68103 98132 73741 13868 13485 13457 13245 13468 13420 13332 13205 13135 91070 8031 8523 66085 40931 37081 13080 13215 13806 73749 010-0225 17260