Meets ANSI/ESD S20.20, Packaging standard ANSI/ESD S541, Moisture Barrier Bag Dri-Shield 3000 Static Control Bag ANSI/ESD S11.4 Level 1, and IPC/JEDEC J-STD-033. This foil moisture barrier bag provides protection for ESD sensitive and Physical Typical Value Testing Method moisture sensitive electronics, typically SMT (Surface Mount Technology) items. Best practice is to use with Desiccant and a Humidity Indicator Card. Moisture Vapor < 0.0003 grams/100 sq. in./24 hrs ASTM F1249 A nylon layer helps to strengthen the bag. The bags are heat sealable and Transmission Rate < 0.002 grams/100 sq. in./24hrs ASTM F392 condition E and suitable for vacuum packaging. Bags are printed with ESD protective and (MVTR) ASTM F2149 moisture sensitive warning symbols, and a lot code for traceability. Tensile Strength 3800 PSI, 26 MPa ASTM D882 Puncture Resistance 16 lbs, 71 N MIL-STD-3010C Method 2065 SCS Moisture Barrier Bags Dri-Shield 3000 are manufactured from a laminate Seal Strength 15 lbs, 66 N ASTM D882 of nylon, foil, and polyethylene. The metal layer provides discharge shielding and minimizes the penetration of electric fields and electrostatic discharges. Thickness 6 mils, 0.006 +/-10% MIL-STD-3010C Method 1003 Open Top Bag ZipTop Bag Marking Adhesion Pass IPC-TM-650 2.4.1 Electrical Typical Value Testing Method ESD Shielding <10 nJ ANSI/ESD STM11.31 4 11 Surface Resistance - 1 x 10 to < 1 x 10 ohms ANSI/ESD STM11.11 Interior 4 11 Surface Resistance - 1 x 10 to < 1 x 10 ohms ANSI/ESD STM11.11 Tolerance: Width -0, +1/4 Exterior Length +/- 1/8 Offset 0 to 1/4 Seal width 3/8 with a tolerance of +/- 1/8 EMI Attenuation 45 dB 1 to 10 GHz Cleanliness Typical Value Testing Method Note: Standard bag markings shown above are not to scale. Silicone Not Detected FTIR Heat Sealing Conditions Typical Value Temperature 400F, 204C Time 0.6 4.5 seconds Pressure 30 70 PSI, 206 482 KPa Tolerance (inches): Width -0, +0.250 Length +/- 0.125 Offset O to 0.250 Bag is free of amines, silicones and heavy metals. Seal width +/- 0.125 This product is intended for commercial use only. This product is not on the Qualified Product Listing under the Defense Standardization Program. NOTE: The complete dry package concept of packaging for electronics requires three elements: Moisture Barrier Bags - To Protect Desiccants - To Absorb Moisture Humidity Indicator Cards - To Monitor Performance SCS Moisture Barrier Bags are packaged in a polyethylene bag. RoHS 2, REACH, and Conflict Minerals Statement Made in the United States of America with Globally Sourced Materials. None of the RoHS 2 restricted materials or REACH substances of very high concern as of 2017/01/12, or Conflict Minerals are intentionally added in manufacturing this product. Specifications and procedures subject to change without notice. Ref: European Union Directive 2011/65/EU and Regulation (EC) No. 1907/2006/CE. See SCS Warranty, Limitation of Liability and Remedies DRI-SHIELD 3000 MOISTURE BARRIER BAG DRAWING DATE 926 JR Industrial Drive, Sanford, NC 27332 WEB SITE: StaticControl.com NUMBER April PHONE (919) 718-0000 2017 Dri-Shield 3000 2017 DESCO INDUSTRIES INC. Employee Owned