Meets ANSI/ESD S20.20, Packaging standard ANSI/ESD S541, Moisture Barrier Bag Dri-Shield 3400 Static Control Bag ANSI/ESD S11.4 Level 1, and IPC/JEDEC J-STD-033. This foil moisture barrier bag is designed to provide protection for ESD Physical Typical Value Testing Method sensitive and moisture sensitive electronics, typically SMT (Surface Moisture Vapor < 0.0003 grams/100 sq. in./24 hrs ASTM F1249 Mount Technology) items. Best practice is to use with Desiccant and a Transmission Rate < 0.002 grams/100 sq. in./24 hrs ASTM F392 condition E and Humidity Indicator Card. The bags are heat sealable and suitable for (MVTR) ASTM F2149 vacuum packaging. Bags are printed with ESD protective and moisture Tensile Strength 6000 PSI, 41 MPa ASTM D882 sensitive warning symbols, and a lot code for traceability. Puncture Resistance 20 lbs, 88 N MIL-STD-3010 Method 2065 SCS Moisture Barrier Bags Dri-Shield 3400 are manufactured from a Seal Strength 15 lbs, 66 N ASTM D882 laminate of polyester, foil, and polyethylene. The metal layer is intended Thickness 4 mils, 0.1016 mm +/-10% MIL-STD-3010 Method 1003 to provide discharge shielding and to minimize the penetration of electric fields and electrostatic discharges.Open Top Bag ZipTop Bag Marking Adhesion Pass IPC-TM-650 2.4.1 Electrical Typical Value Testing Method ESD Shielding <10 nJ ANSI/ESD STM11.31 4 11 Surface Resistance - ANSI/ESD STM11.11 1 x 10 to < 1 x 10 ohms Interior 4 11 Surface Resistance - ANSI/ESD STM11.11 1 x 10 to < 1 x 10 ohms Exterior Tolerance: Width -0, +1/4 EMI Attenuation 45 dB 1 to 10 GHz Length +/- 1/8 Offset 0 to 1/4 Cleanliness Typical Value Testing Method Seal width 3/8 with a tolerance of +/- 1/8 Silicone Not Detected FTIR LOT 40110987654321 Note: Standard bag markings shown Heat Sealing Conditions Typical Value above are not to scale. Temperature 400F, 204C Time 0.6 4.5 seconds Pressure 30 70 PSI, 206 482 KPa ** Bags are printed (hot stamp or thermal) with an ESD Bag is free of amines, silicones and heavy metals. protective symbol and a lot code for traceability. ** Tolerance (inches): Width -0, +0.250 Length +/- 0.125 Oset O to 0.250 ff This product is intended for commercial use only. This product is not on the Qualified Product Seal width +/- 0.125 Listing under the Defense Standardization Program. NOTE: The complete dry package concept of packaging for electronics requires three elements: Moisture Barrier Bags - To Protect Desiccants - To Absorb Moisture SCS Moisture Barrier Bags are packaged in a polyethylene bag. Humidity Indicator Cards - To Monitor Performance RoHS, REACH, and Conflict Minerals Statement See the SCS RoHS, REACH, and Conflict Minerals Statement: Made in the United States of America with Globally Sourced Materials. X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Antistatic Control Products category: Click to view products by Desco manufacturer: Other Similar products are found below : 13020 13490 13870 13879 13881 13883 13882 14404 2202SP 3039 37061 42470 09060 09857 42516 37059 04563 17252 19691 19695 09037 09826 09813 66070 100816 68101 68103 98132 73741 13868 13485 13457 13245 13468 13420 13332 13205 13135 91070 8031 8523 66085 40931 37081 13080 13215 13806 73749 010-0225 17260