Product Data Sheet 3M Snaps and 3M Pres-N-Snap Tool Snaps are used to connect a ground cord to a static mat. Grommet and Clinch Style snaps are attached with a Pres-N-Snap. nickel plated brass snaps provide electrical connection and a long service life. 3M SNAPSOCKET3/8 3M Pres-N-Snap 3/8 (10 mm) Female Snap Grommet Style For Attaching Grommet Style Snaps Socket snaps are held in place by crimping the tip of The Pres-N-Snap tool is: an eyelet though the center of the socket with a snap Versatile and easy to use. tool. This traps the mat between the socket on the top Capable of setting numerous brands of fasteners simply by changing the dies. of the mat and the eyelet on the back of the mat. 10 sockets and eyelets are included in each pack. 3M Female Snap SNAPSOCKET3/8 and 3M Female Snap and Eyelet 3034 3M SNAPSTUD3/8 3/8 (10 mm) Male Snap Grommet Style Stud snaps are held in place by crimping the tip of an eyelet though the center of the stud with a snap tool. This traps the mat between the stud on the top of the mat and the eyelet on the back of the mat. 10 studs and eyelets are included in each pack. 3M Male Snap SNAPSTUD3/8 and 3M Pres-n-Snap Tool 3M Male Snap and Eyelet 3033 3M FPSNAP 3/8 (10 mm) Female Snap Prong Clinch Style Prong Clinch snaps are held in place by pushing the prongs through the mat and crimping them on the bottom of the mat. 3M Female 4-Prong Snap FPSNAP and 3M Female 8-Prong Snap 3050Product Data Sheet 3M Snaps and 3M Pres-N-Snap Tool Pres-N-Snap Tool Instructions Item Numbers 2. 1. SOCKET OR STUD SNAPSOCKET3/8 3/8 Female snap and eyelet 1. Press the eyelet through the MAT SNAPSTUD3/8 3/8 Male snap and eyelet mat from the back. ( A utility knife or phillips screw driver can be EYELET FPSNAP 3/8 Female prong snap used to make a hole.) Pres-N-Snap Tool Snap attaching tool 2. Place the socket or stud on 3033 3/8 Male snap and eyelet top of the eyelet 3034 3/8 Female snap and eyelet 3050 3/8 Female 8-prong snap 3M is a trademark of 3M Company. Important Notice Warranty Limited Remedy Limited Liability. All statements, technical information, and recommendations related to 3Ms products are based This product will be free from defects in material and manufacture for one year from the time of on information believed to be reliable, but the accuracy or completeness is not guaranteed. purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED Before using this product, you must evaluate it and determine if it is suitable for your intended TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A application. You assume all risks and liability associated with such use. Any statements related PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, to the product which are not contained in 3Ms current publications, or any contrary statements your exclusive remedy shall be, at 3Ms option, to replace or repair the 3M product or refund contained on your purchase order shall have no force or effect unless expressly agreed upon, in the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable writing, by an authorized officer of 3M. for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3 Electronics Materials Solutions Division Static Control Products 926 JR Industrial Drive Sanford, NC 27332-9733 Toll-Free: 866-722-3736 International: 919-718-0000 Please recycle. Printed in USA. Email: 3mstaticinfo mmm.com 3M 2014. All rights reserved. www.3Mstatic.com 78-9102-1931-6 JHA