4332120001 Dialight

FEATURES / BENEFITS Hi-Flux LED Modules Robust Hi-Flux LED Technology 433 Series TRAFFIC SIGNALS Uniform illumination - better than incandescent 90% reduction in power vs. incandescent Long life Up to 10 times longer than incandescent Hard coated lenses for abrasion resistance Wide selection of products Easy to install into existing signal enclosure ITE VTCSH- 2 compliant types available Caltrans approved types available CSA approved types available SPECIFICATIONS Operating Voltage Range: 80VAC to 135VAC (120VAC nominal) 195VAC to 265VAC (230VAC nominal) Convex tinted lens reduces glare & sun reflection Fuse and transient suppressor incorporated for line and load protection Operating Temperature Range: -40C to +74C Turn on / Turn off Time = 75 msec max Power factor > 0.9 Total harmonic distortion < 20% Meets FCC Title 47, Subpart B, Section 15 Regulations for electrical noise Conforms to MIL-STD-810F for blowing rain Provided with quick connect terminals and spade adapters Written manufacturers warranty available on request All products traceable by serial number Dialight Corporation 1501 Route 34 South Farmingdale, NJ 07727 USA Tel: (1) 732-919-3119 Fax: (1) 732 -751-5778 www.dialight.com MDTSMODP001 FHi-Flux LED Modules 433 Series TRAFFIC SIGNALS 8 (200mm) SIGNAL MODULES Min Typical Luminous Dominant Approved EN 12368 Lens 2 CSA by Meets ITE class A2/1 Wattage Intensity Wavelength Type 1 o Part Number Color Approved Caltrans VTCSH - 2 Type W at 25 C (cd) (nm) 120 Volt 433-1110-003 Red Tinted 6 133 622 433-3130-001 Yellow Tinted 9 331 590 433-2120-001 Green Tinted 10 267 505 433-2170-001 Green Clear 10 267 505 230 Volt 433-1110-002 Red Tinted 6 250 622 433-3130-002 Yellow Tinted 9 250 590 433-2120-002 Green Tinted 10 250 505 1 CSA approval is to Std. 250 for Luminaires 2 Initial: Measured at peak intensity point 12 (300mm) SIGNAL MODULES Min Dominant EN 12368 Typical Luminous Approved Lens Wavelength 2 Meets ITE CSA class A2/1 Wattage by Type Intensity (nm) o 1 VTCSH - 2 Type W Color Caltrans at 25 C (cd) Part Number Approved 120 Volt 433-1210-003 Red Tinted 6 339 622 433-3230-001 Yellow Tinted 12 678 590 3 433-3230-805 Yellow Tinted 23 1571 590 433-2220-001 Green Tinted 14 678 505 433-2270-001 Green Clear 14 678 505 230 Volt 433-1210-002 Red Tinted 6 250 622 433-3230-002 Yellow Tinted 12 250 590 433-2220-002 Green Tinted 14 250 505 1 CSA approval is to Std. 250 for Luminaires 2 Initial: Measured at peak intensity point. 3 Extreme Bright Yellow for high visibility is 2.3 times brighter than standard 12 yellow LED signals. Dialight Corporation 1501 Route 34 South Farmingdale, NJ 07727 USA Tel: (1) 732-919-3119 Fax: (1) 732-751-5778 www.dialight.com MDTSMODP001 F