FEATURES / BENEFITS
RoHS Compliant
586 Series
Long life - typically 100K hours
High brightness with low current draw - uses up to
Single Chip BASED LED
90% less energy than an incandescent
Long life - typically 100K hours
T3 1/4 MINIATURE SCREW (E10)
True non-polarized configuration
No heat generated
Mounts directly into industry standard socket
Resistant to shock and vibration
AlInGaP and InGaN technology
Super bright single chip design
Colors include red, green, yellow, blue and white
Dialight's line of based LED lamps is designed to directly replace
many popular subminiature and miniature incandescent lamps.
The benefits of LED technology over incandescent are significant:
They offer long life, are shock resistant, withstand vibration and
provide energy conservation.
SPECIFICATIONS
Operating voltages: 6, 14, and 28 VDC
Non-polarized
o o
Operating temperature: -30 C to +85 C
o o
Storage temperature: -40 C to +100 C
Replaces incandescent lamp numbers*:
40, 46, 1481, 1487, 1821
*See Dialights Incandescent lamp/based LED
Measurements are typical
cross reference for a complete listing
Dimensions are inches [mm]
CONSIDERATIONS
Since lens caps act as filters for the light emitted from the based LED, it is important to match the emitting color of the LED.
If not matched properly, the overall light output may be substantially reduced. Dialight recommends using transparent lenses,
which will optimize the light output.
Although these lamps can be operated at a lower voltage, which will increase the life, the intensity will be reduced.
Operation of the based LED at a higher voltage should not exceed 10% above the recommended voltage.
Dialight does not recommend that based LED lamps be used in neon sockets.
Dialight reserves the right to make changes at any time
in order to supply the best product possible.
Dialight Corporation
1501 Route 34 South Farmingdale, NJ 07727 USA
Tel: (1) 732-919-3119 Fax: (1) 732-751-5778 www.dialight.com
MDEL586F001_F586 Series
Single Chip BASED LED
T3 1/4 MINIATURE SCREW (E10)
T3 1/4 MINIATURE SCREW (E10)
PEAK
VOLTAGE CURRENT INTENSITY RoHS
PART NUMBER COLOR WAVELENGTH
(VDC) TYP.-(mA) TYP.-(mcd) COMPLIANT
(nm)
586-2701-201F Red 630 6 15 1050
586-2702-201F Green 525 6 15 1650
586-2703-201F Yellow 592 6 15 1275
586-2705-201F Blue 470 6 15 487
586-2706-201F White * 6 15 825
586-2701-203F Red 630 14 15 1050
586-2702-203F Green 525 14 15 1650
586-2703-203F Yellow 592 14 15 1275
586-2705-203F Blue 470 14 15 487
586-2706-203F White * 14 15 825
586-2701-205F Red 630 28 7.5 525
586-2702-205F Green 525 28 7.5 825
586-2703-205F Yellow 592 28 7.5 637
586-2705-205F Blue 470 28 7.5 243
586-2706-205F White * 28 7.5 412
* Color Coordinates: x = 0.330, y = 0.365
Based LEDsSELECTION
With the technological advancements in Light Emitting Diodes (LEDs) brightness can now rival the incandescent
lamp when used in similar packages. These advancements have created a new type of product called the based
LED - an LED with the functionality of an incandescent bulb.
The following styles are currently available in red, green, yellow, blue and white:
T1 3/4 Midget Flange
T1 3/4 Bi-Pin
T1 3/4 Wedge (T5)
T2 Telephone Slide
T3 1/4 Miniature Bayonet (BA9s)
T3 1/4 Miniature Screw (E10)
T3 1/4 Wedge (T10)
15mm SC Bayonet (BA15s)
Dialights line of based LEDs continues to grow.
Please visit our website for more information.
www.dialight.com
Dialight reserves the right to make changes at any time
in order to supply the best product possible.
Dialight Corporation
1501 Route 34 South Farmingdale, NJ 07727 USA
Tel: (1) 732-919-3119 Fax: (1) 732-751-5778 www.dialight.com
MDEL586F001_F