FEATURES / BENEFITS RoHS Compliant 586 Series Long life - typically 100K hours High brightness with low current draw - uses up to Single Chip BASED LED 90% less energy than an incandescent Long life - typically 100K hours T3 1/4 MINIATURE SCREW (E10) True non-polarized configuration No heat generated Mounts directly into industry standard socket Resistant to shock and vibration AlInGaP and InGaN technology Super bright single chip design Colors include red, green, yellow, blue and white Dialight s line of based LED lamps is designed to directly replace many popular subminiature and miniature incandescent lamps. The benefits of LED technology over incandescent are significant: They offer long life, are shock resistant, withstand vibration and provide energy conservation. SPECIFICATIONS Operating voltages: 6, 14, and 28 VDC Non-polarized o o Operating temperature: -30 C to +85 C o o Storage temperature: -40 C to +100 C Replaces incandescent lamp numbers*: 40, 46, 1481, 1487, 1821 *See Dialights Incandescent lamp/based LED Measurements are typical cross reference for a complete listing Dimensions are inches mm CONSIDERATIONS Since lens caps act as filters for the light emitted from the based LED, it is important to match the emitting color of the LED. If not matched properly, the overall light output may be substantially reduced. Dialight recommends using transparent lenses, which will optimize the light output. Although these lamps can be operated at a lower voltage, which will increase the life, the intensity will be reduced. Operation of the based LED at a higher voltage should not exceed 10% above the recommended voltage. Dialight does not recommend that based LED lamps be used in neon sockets. Dialight reserves the right to make changes at any time in order to supply the best product possible. Dialight Corporation 1501 Route 34 South Farmingdale, NJ 07727 USA Tel: (1) 732-919-3119 Fax: (1) 732-751-5778 www.dialight.com MDEL586F001 F586 Series Single Chip BASED LED T3 1/4 MINIATURE SCREW (E10) T3 1/4 MINIATURE SCREW (E10) PEAK VOLTAGE CURRENT INTENSITY RoHS PART NUMBER COLOR WAVELENGTH (VDC) TYP.-(mA) TYP.-(mcd) COMPLIANT (nm) 586-2701-201F Red 630 6 15 1050 586-2702-201F Green 525 6 15 1650 586-2703-201F Yellow 592 6 15 1275 586-2705-201F Blue 470 6 15 487 586-2706-201F White * 6 15 825 586-2701-203F Red 630 14 15 1050 586-2702-203F Green 525 14 15 1650 586-2703-203F Yellow 592 14 15 1275 586-2705-203F Blue 470 14 15 487 586-2706-203F White * 14 15 825 586-2701-205F Red 630 28 7.5 525 586-2702-205F Green 525 28 7.5 825 586-2703-205F Yellow 592 28 7.5 637 586-2705-205F Blue 470 28 7.5 243 586-2706-205F White * 28 7.5 412 * Color Coordinates: x = 0.330, y = 0.365 Based LEDsSELECTION With the technological advancements in Light Emitting Diodes (LEDs) brightness can now rival the incandescent lamp when used in similar packages. These advancements have created a new type of product called the based LED - an LED with the functionality of an incandescent bulb. The following styles are currently available in red, green, yellow, blue and white: T1 3/4 Midget Flange T1 3/4 Bi-Pin T1 3/4 Wedge (T5) T2 Telephone Slide T3 1/4 Miniature Bayonet (BA9s) T3 1/4 Miniature Screw (E10) T3 1/4 Wedge (T10) 15mm SC Bayonet (BA15s) Dialights line of based LEDs continues to grow. Please visit our website for more information. www.dialight.com Dialight reserves the right to make changes at any time in order to supply the best product possible. Dialight Corporation 1501 Route 34 South Farmingdale, NJ 07727 USA Tel: (1) 732-919-3119 Fax: (1) 732-751-5778 www.dialight.com MDEL586F001 F