FEATURES / BENEFITS p Ultra slim design, less than 1/2 (13mm) high p 70% lumen maintenance 50,000+ hr life 25C ambient temperature CL2 SERIES p Low energy use, no IR or UV emissions p Modular quick connect system for easy installation p Designed for even LED spacing over linear runs, no hotspots or dark spots between fixtures p Cool to touch, suitable for direct mounting on flammable surfaces p Onboard constant current driver with low voltage input p ETL listed to UL standards for dry locations Frosted Lens Version p Utilizes the latest high efficiency LED technology APPLICATIONS The CL2 Series is designed for use in a wide range of lighting applications, especially areas which benefit from its ultra slim profile, low energy and long operating life. Designed around the latest LED technology, the CL2 series represents true innovation in lighting, delivered in a package which blends seamlessly into its surroundings. Sample applications include, but not limited to: Cove and cornice lighting, shelf lighting, integrated into furniture, under counters, stair hand rails, display cases, task lighting. OPERATING CONDITIONS MATERIALS/FINISH p Ambient temperature -20C to +40C (-4F to +104F) p Anodized aluminum module base with polycarbonate lens p Input voltage 24VDC. Use only class 2 power supplies p Plug & play connector system p Power consumption 5.3W per module p Onboard constant current driver Does not include power supply losses p 4 high output 1W LEDs per module p Max of modules connected per run = 20. Up to 16 p 20AWG, PTFE cable - UL rated E213967, 300V, 80C modules can be operated on a 100W power supply ORDERING INFORMATION Catalog Min Luminous Typical Luminous Typical Lens LED Color Number Flux per Module Flux per Module CRI CCT (B) (A) (lumens) (lumens) Cool White C 5000K 288 342 75 C = Clear Neutral White N 4100K 242 288 75 Warm White W 3000K 204 242 75 F = Frosted High CRI Warm White Z 3000K 171 204 92 Note: Special colors available, consult factory. LED data is LED manufacturers test data at 25 C Tj. Light output at max acceptable ambient temp will be approximately 15-20% lower depending on the thermal conductivity of the mounting surface. Clear lens will reduce fixture light output by additonal 8-10%, and frosted lens by additional 30%. Connectors (sold separately) CL2-E2E = End to end module connector CL2-START = 3m / 9 10 start cable (supplies power to first module) CL2-FLEX = 63mm / 2.5 flexible end to end connector CL2-END = End plug CL2-EXTEND = 952mm / 37.5 flexible end to end connector Dialight Corporation Dialight Lumidrives PRIVATE LABEL 1501 Route 34 South Farmingdale, NJ 07727 USA York House Weatherby Road Long Marston, York, YO26 7NH Tel: (1) 732-919-3119 Fax: (1) 732-751-5778 www.dialight.com OEM PROGRAM Tel: 0845 6346161 Fax: 0845 6346160 www.dialight.com MDEXLUMCL2 AMECHANICAL DIMENSIONS Dimensions in inches (mm) Requires Class 2 low voltage power supply (purchased separately) Total power consumption of modules should not exceed rating of power supply Observe minimum rating of power supply used PHOTOMETRIC DATA CL2 Module with Clear Lens (Normalized Data) 2 CL2 modules with start cable, end to end connector, and end plug 2 CL2 modules with start cable, flex connector, and end plug Dialight reserves the right to IES 32 files available - consult factory make changes at any time in order to supply the best product possible. Dialight Corporation Dialight Lumidrives PRIVATE LABEL 1501 Route 34 South Farmingdale, NJ 07727 USA York House Weatherby Road Long Marston, York, YO26 7NH Tel: (1) 732-919-3119 Fax: (1) 732-751-5778 www.dialight.com OEM PROGRAM Tel: 0845 6346161 Fax: 0845 6346160 www.dialight.com MDEXLUMCL2 A