LML-6LVC-WOV Dialight

FEATURES / BENEFITS p Fully modular linear arrays of ultra high brightness LEDs p Utilizes the latest 100+ lumen LUXEON Rebel LEDs for cool white, 100+ lumen for neutral white PWM SERIES LV & 50+ lumen for warm white LINEAR MODULES p Onboard 350mA constant current driver runs off low voltage input p ETL listed to UL2108 standards p Choice of colour temperatures & optical patterns p >70% lumen maintenance 50,000 hours at max acceptable ambient temperature p Primary heatsinking included p Color binned for consistent color OPERATING CONDITIONS APPLICATION p Operating Ambient temperature -30C to +55C p Linear lighting p Onboard driver model operates off 12-24VDC / p Accent lighting 11-17VAC input p Flood lighting p Max modules per run = 10 12VAC, 16 24VDC input p Street & area lighting p Typical power consumption 8.0W per module p General illumination p Additional heatsinking required for optimal performance p Current draw 580mA 12VDC input* *Note:- 750mA per unit required for initial start-up 290mA 24VDC input* ORDERING INFORMATION MATERIALS / FINISH p Six premium LUXEON Rebel LEDs per module p Anodized cast aluminum heatsink p Dialight-Lumidrives optics (OPC 11 Series) p Onboard 350mA constant current driver p Required Entry Cable, Power Supply to 1st module (sold seperately): LML6-LV-CON-CAB Optic (BB) Typical Colour Connectors (AA) Temperature LML6-LV-CON-CAB (sold separately) SP = 5 degree spot Entry cable, power supply to 1st module MD = 8 degree med. CW = 5000K - 6350K LML6-LV-M2M-CAB (ships w/ 1 in box) WD = 20 degree wide Connection cable (module to module) NW = 3800K - 4100K OV = 5X25 degree oval WW = 2850K - 3250K * Cables use AWG 20 wires FR = 7 degree frosted spot *All angles are half divergence www.dialight.comMECHANICAL DIMENSIONS 11.7 x 1.498 x 0.585 (297.18mm x 38.05mm x 14.86mm) Mounting hole spacing = 3.22 81.8mm . Max screw size 8 Total length for Z units connected end to end = (Z x 11.7) - ((Z-1) x 0.25) (inches) (Z x 297.2) - ((Z-1) x 6.35) (mm) Top View Side View Example: 2 units total length = 23.15 588.01 ASSEMBLY INFORMATION 1) Remove cover from module (Do not remove mask) 2) Connect LML6-LV-M2M-CAB quick connect cables between modules as indicated in the photo. If desired, insert 8/32 or M6 mounting screws in holes provided. 3) Wire between cables may be routed through end as indicated in photo or around side of module. 4) Connect LML6-LV-CON-CAB into front of first module. 5) Replace cover. 6) Connect leads on LML6-LV-CON-CAB to low voltage power supply. Red wire to +, black wire to - PHOTOMETRIC DATA IES 32 files available, consult factory Dialight reserves the right to make changes at any time in order to supply the best product possible. The most current version of this document will always be available at: www.dialight.com/Assets Brochures And Catalogs Illumination MDEXLUMPWMLV.pdf MDEXLUMPWMLV C 2 www.dialight.com