EMBEDDED IOT SOLUTIONS SMART TRANSCEIVERS FT 6050 Smart Transceiver Ethernet Interface FT 6050 Smart Transceiver Application (up to 256Kbytes) 14908-1 L4-L6 BACnet UART BACnet LON LON/IP BACnet FT Custom IP MS/TP 14908-1 L2-L3 IPv4 14908-1 MAC 14908-1 MAC (modied) 14908-2 PHY Neuron I/O Ethernet Interface FT-X3 RS-485 PHY Figure 1. FT 6050 Firmware Protocol Stacks Product Description Features The FT 6050 Smart Transceiver is a system-on-chip for modernizing Built-in LON, LON/IP, BACnet FT, and consolidating smart control networks. It is a key product in and BACnet MS/TP stacks provide Adestos IzoT platform the most comprehensive and open compatibility with millions of LON and control networking platform for the Industrial Internet of Things BACnet devices and enabling IP access to (IIoT). It offers compatibility with the large installed base of LON every FT 6050 based device FT and BACnet MS/TP devices while adding support for LON/IP Built-in Free Topology (FT) transceiver and BACnet/IP communication over the reliable and proven Free provides the most cost-effective, easy-to-in - Topology (FT) channel. It is designed to bring unprecedented stall, and easy-to-use interface for commu- flexibility and openness while lowering development and device nication with twisted-pair cables supporting polarity-insensitive free topology star, daisy costs. chain, bus, loop, or mixed topology wiring The FT 6050 Smart Transceiver integrates a high-performance and very high noise immunity Neuron core with an FT twisted-pair transceiver. Combined with Low-cost and royalty-free IzoT FT 6000 the proven FT-X3 Communications Transformer and inexpensive EVK available for rapid application flash memory, the FT 6050 Smart Transceivers provide a very development and testing flexible, low-cost, feature-enhanced LON FT, BACnet MS/TP, LON/ Free and royalty-free IzoT SDKs available IP, and BACnet/IP solution all within the same device with a single for simple integration with other processors application. Integrated quad core processor supports A rich set of LonMark and IoT standard profiles and data types is applications up to 256KB for a 5x increase included that you can use to further reduce application development over previous generations time. Supports up to 254 network variables (NVs), 127 aliases and 254 address table The FT 6050 Smart Transceiver includes four independent entries (16x increase) 8-bit logical processors to manage the physical MAC layer, the Neuron core supports easy migration of communication protocol stacks, the user application, and interrupts existing applications written for previous (see Figure 3, on page 2). generation Neuron chips and smart transceivers www.adestotech.comproduct description 12 5 GPIO and FT-X3 I/O FT PHY USART Transformer 3 Serial Flash Media Memory Memory Interface Access CPU SPI Network Stack CPU RAM (64K x 8) Interrupt CPU ROM Application (16K x 8) CPU Unique Control, Clocks, 48-bit Figure 2. FT Free Topology Network Configurations and Timers MAC ID 2 The FT 6050 Smart Transceiver supports polarity-insensitive Crystal Reset Service cabling using a star, bus, daisy-chain, loop, or combination topology (see Figure 2). Installers dont have to follow a strict set Figure 3. FT 6050 Smart Transceiver of wiring rules imposed by other networking technologies. Instead, they can install wiring in the fastest and most cost- effective manner, thereby saving time and money. FT wiring also simplifies network Features, continued expansion by eliminating restrictions on wire routing, splicing, and device placement. The FT 6050 extends all the benefits of FT wiring Up to 80MHz system clock provides up to IP devices, allowing an efficient multi-drop IP capability where to a 16x performance improvement over multiple IP devices can be very simply connected in any topology previous generations without the need for switches or hubs. On-chip 64KB RAM and 16KB ROM Multi-Protocol Operation 3.3V operation The FT 6050 simultaneously supports up to four different User-programmable interrupts, hardware communication protocols, as shown in Figure 1 (page 1), allowing USART, and 12 GPIO pins with 35 device makers unprecedented flexibility in creating control devices configurable I/O drivers for a wide variety of applications using one application. Backward Compatible with low-cost surface mount compatibility and future proofing can both be met using a common FT-X3 Communications Transformer platform based on the FT 6050 Smart Transceiver. Supports a rich set of LonMark and IoT For LON FT communication, the FT 6050 implements the complete standard profiles and data types to reduce LON stack as defined by ISO/IEC 14908-1 and is fully backward application development time compatible with devices running the LON stack, including devices Flash file system for data logging and based on the Neuron 3120, Neuron 3150, or the FT 3120, FT 3150, or other applications requiring persistent FT 5000 Smart Transceiver. storage For LON/IP communication, the FT 6050 implements layers 4 Unique 48-bit IEEE MAC ID through 7 of the ISO/ IEC 14908-1 LON stack running on top of 7mm x 7mm 48-pin QFN package layers 2 and 3 of a UDP/IP stack. This allows the implementation -40C to 85C industrial temperature range of devices that are fully compatible with classic LON applications while supporting native IP addressing at the device level. This allows LON compatible applications to run unmodified over FT wiring while gaining IP addressing at the device level. www.adestotech.com 2