Type 1D DIN and Type 2D DIN Base Plates Models 48111, 48222, 48111R, and 48222R t DIN Rail Base Plates for use with the LonPoint Interface, Scheduler, Data Logger, and Router modules t Allows pre-wiring and cable testing by an electrician prior to installing the electronics t Numbered wire clamp-style screw terminals accept 12-24 AW (2 to 0.5mm) wire t Power and network wiring are looped through each Base Plate, providing continuity during hot-plugging t U.L. Listed, cU.L . Listed, CE Mark 1D 2D t Jumper Plug speeds connection of adjacent Base Plates LonPoint Modules Two sets of screw terminals are provided for both the network and power wiring connections. These connections are The LonPoint Modules are products designed to integrate internally jumpered on the DIN Base Plates, providing new and legacy sensors and actuators, as well as LONMARK continuity of power and network communications even if one devices, into cost-effective, interoperable, control systems for LonPoint Module is removed. This feature permits the base building and industrial applications. In contrast to traditional plate wiring to be pre-installed, and the network and power control networks, which use closed islands of control linked circuits checked for continuity, even before a single LonPoint with proprietary gateways, the LonPoint Modules offer an open Module is installed. This feature also prevents network and distributed system architecture in which every device performs power interruptions as a result of hot swapping LonPoint some control processing and can be accessed from any location Modules during commissioning or service operations. in the network. Distributing the processing throughout the The two sets of screw terminals permits incoming and network and providing open access to every device lowers the outgoing wiring to be landed at separate screw terminals, overall installation and life cycle costs, increases reliability by without the need to install more than one wire in any given minimizing single points of failure, and provides the exibility screw terminal. to adapt the system to a wide variety of applications. There are two types of DIN Rail Base Plates. The Type 1D The system consists of the LonPoint Interface, Scheduler, DIN Base Plates (Models 48111, 48111R) are used with Data Logger, and Router Modules, LonPoint Application TM TM LonPoint Interface, Scheduler, and Data Logger Modules, Programs, LNS - based LonMaker Integration Tool, while the Type 2D DIN Base Plates (Models 48222, 48222B) LonPoint Plug-In and LNS DDE Server. The LPR Router are used with LonPoint Router Modules. Modules may be used with a LonPoint System or as part of any Models 48111R and 48222R are compliant with the LONWORKS network. European Directive 2002/95/EC on the restriction of the use of certain hazardous substances (RoHS) in electrical and elec- Base Plates tronic equipment. The Type 1D DIN and Type 2D DIN Base Plates provide an interface between a LonPoint Module and the network, power, and I/O wiring. The DIN Rail Base Plates are designed to be installed on either 35mm x 7.5mm or 35mm x 15mm DIN rails, or, using the integral keyhole slots, on a wall or panel. The DIN Base Plates are shipped with a Jumper Plug that interconnects the power and network connections of adjacent DIN Base Plates without the need for any wiring. This labor saving feature can result in signicant installation savings and makes for a neater overall installation. Jumper PlugSpecifications Function Description Regulatory compliance U.L. 916, cU.L. per CSA C22.2 No. 205, CE Mark Temperature 40 to +85C, operating and non-operating Humidity 10 to 95% RH 50C Maximum loop-through current 16A rms Packaging ABS Dimensions 6.299x 3.937x 1.637 (16cm x 10cm x 4.16cm) Copyright 1999-2007, Echelon Corporation. Echelon, LON, LONWORKS, LONMARK, LonBuilder, NodeBuilder, LonManager, LonTalk, LonUsers, LonPoint, Digital Home, Neuron, 3120, 3150, LNS, i.LON, LONWORLD, ShortStack, Panoramix, Panoramix Powered by Echelon, LonMaker, the Echelon logo, and the LonUsers logo are trademarks of Echelon Corporation registered in the United States and other countries. Pyxos, LonLink, LonResponse, LonSupport, LONews, Open Systems Alliance, OpenLDV, LonBridge, Powered by Echelon, LNS Powered by Echelon, LONWORKS Powered by Echelon, Networked Energy Services Powered by Echelon, NES Powered by Echelon, and Thinking Inside the Box are trademarks of Echelon Corporation. Other trademarks belong to their respective holders. Disclaimer Neuron Chips, Free Topology Twisted Pair Transceiver Modules, and other OEM Products were not designed for use in equipment or systems which involve danger to human health or safety or a risk of property damage and Echelon assumes no responsibility or liability for use of the Neuron Chips or Free Topology Twisted Pair Transceiver Modules in such applications. ECHELON MAKES AND YOU RECEIVE NO WARRANTIES OR CONDITIONS, EXPRESS, IMPLIED, STATUTORY OR IN ANY COMMUNICATION WITH YOU, AND ECHELON SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. 003-0305-01E www .echelon.com