INDUSTRIAL SERIAL SERVER DIGI ONE IA Easy, reliable serial-to-Ethernet and Modbus-to-Modbus/TCP connectivity for industrial automation applications Digi One IA provides reliable, cost-effective network multiple Modbus/TCP masters can share Modbus serial connectivity for serial devices. This unobtrusive and easy- slaves, or Modbus serial masters can access Modbus/TCP to-use serial server delivers serial-to-Ethernet connectivity to slaves. Programmable Logic Controllers (PLCs), Remote Terminal Digi One IA is easy to install locally or remotely. The IP Units (RTUs), bar-code readers and other industrial devices. address can be configured using DHCP, ARP-Ping or Setup, Digi One IA supports most industrial automation protocols an application included with the installation CD that detects through TCP/UDP connections, serial bridging or COM port Digi One devices on the network. Using the web interface, redirection using Digis patented RealPort software. RealPort users can configure advanced functions into their enables existing applications to communicate with serial application. devices over the Ethernet. By creating a Modbus bridge, BENEFITS APPLICATION EXAMPLE: INDUSTRIAL AUTOMATION Patented RealPort for COM/TTY port control and management TCP/UDP Socket Services for broad device connectivity and application use Modbus serial to Modbus/TCP protocol conversion HMI SYSTEM Switch selectable RS-232/422/485 for simple Ethernet interfacing to any type of serial device DIGI ONE IA Industrial DIN rail mounting for use in space- prohibitive control cabinets Galvanic isolation (between power and serial) Tunable for low latency or optimized throughput RELATED PRODUCTS RS-232/422/485 DigiOne IAP DigiOne DigiOne PostServer TS Power Supply Modbus PLC IAP HAZ SP IA H MEI 76000736SPECIFICASPECIFICATIONSTIONS Digi One IA FEATURES HTTP configuration, Digi Port Authority - Remote management diagnostics and auto-discovery tool MANAGEMENT Telnet, Reverse Telnet and extended Telnet RFC 2217 TCP/UDP Socket Services UDP, support 32 concurrent socket connections DHCP/RARP, ARP-Ping Modbus ASCII/RTU to Modbus TCP conversion PROTOCOLS Modbus Ethernet-to-Serial Bridge Function supporting Modbus/TCP, Modbus/UDP, Modbus/RTU, Modbus/ASCII Modbus bridge supports TCP and UDP Encapsulation of Modbus/RTU, Modbus/ASCII Patented RealPort for COM/TTY ports SOFTWARE AIX, HP-UX, Solaris, Linux, Windows 2000, Windows XP, Windows 7, Windows 8, Windows 8.1, Windows 10, Windows Server 2003, OPERATING SYSTEMS Windows Server 2008, Windows Server 2012. Note: TCP/UDP socket services are operating system independent STATUS LEDS Serial signals, Power, Ethernet, Diagnostics DIMENSIONS (L X W X D) 4.70 in x 0.90 in x 4.0 in (12.00 cm x 2.30 cm x 10.10 cm) 2.25 oz (64.00 g) WEIGHT OTHER Full modem and hardware flow control, Flash upgradeable firmware, 35 mm DIN rail mounting INTERFACES SERIAL PORTS 1 RS-232/422/485 (switch selectable) DB-9M or screw terminal connectors SERIAL CONNECTOR Up to 230 Kbps SERIAL THROUGHPUT ETHERNET PHYSICAL LAYER 10/100 Base-T POWER REQUIREMENTS POWER INPUT 9-30 VDC .5 Amps max Screw terminal block power jack for external supply POWER CONNECTOR PRODUCT SURGE PROTECTION 2 kV isolation between power supply and serial ground (ESD) ENVIRONMENTAL OPERATING TEMPERATURE 0 C to 60 C (32 F to 140 F) RELATIVE HUMIDITY 5% to 90% (non-condensing) ETHERNET ISOLATION 1500 VAC min per IEEE 802.3/ANSI X3.263 15 kV human body model SERIAL PORT PROTECTION (ESD) REGULATORY APPROVALS SAFETY UL 60950, UL1604 (Class 1 Div 2), EN60950, CAN/CSA C22.2 No.60950 EMISSIONS/IMMUNITY FCC Part 15 Subpart B (Class A), EN55024, EN55022 (Class A), EN61000-6-2 PART NUMBERS DESCRIPTION 70001862 Digi One IA DigiOne IA - TOP DigiOne IA - BOTTOM 0.9 Ethernet Reset Buttons Serial Port DB-9M DIP 4.7 (Screw Terminals) Serial Switches Power Input (Screw Terminals) 4.0 DIGI INTERNATIONAL WORLDWIDE HQ DIGI INTERNATIONAL SINGAPORE DIGI SERVICE AND SUPPORT / You can purchase with confidence knowing that Digi is always available to serve you with expert technical support and our industry 877-912-3444 / 952-912-3444 / www.digi.com +65-6213-5380 leading warranty. For detailed information visit www.digi.com/support. DIGI INTERNATIONAL GERMANY DIGI INTERNATIONAL CHINA 1996-2018 Digi International Inc. All rights reserved. +49-89-540-428-0 +86-21-50492199 / www.digi.com.cn All trademarks are the property of their respective owners. 91001156 DIGI INTERNATIONAL JAPAN F3/618 +81-3-5428-0261 / www.digi-intl.co.jp