A24-HASM-450 Digi International

XBee XBee / XBee-PRO RF Modules 802.15.4 Protocol Product ManualXBee / XBee-PRO RF Modules 802.15.4 Product Manual (Part number 90000982 S) Revision Date Description A September 2008 Baseline release. B September 2009 Updated to support to support XBee 802.15.4 and DigiMesh 900 firmware. C November 2010 Updates. D July 2011 Update to antenna information. E October 2011 Changes to the 802.15.4 and Operation sections. F January 2012 PCB antenna changes. G March 2012 Fixed MM command content on page 48. H August 2012 Editorial change. IN/A Revision I is not used. J January 2013 Removed reference to commissioning button pin 20. K February 2013 Corrected the KY parameter information. L May 2013 Removed incorrect API operation information. M July 2013 Corrected parameter range on two command descriptions. Parameter range on IS and IO were flipped. Switched them back to the correct cells in the table. N April 2014 Added note on page 24 and 40 calling out appropriate European CCA value settings. O N/A Revision O is not used. P June 2014 Updated link from www.ero.dk to www.cept.org. Q N/A Revision Q is not used. R October 2014 Fixed garbled text for the description of the NT parameter in the NT (Node Discover Time) Command section. Added reference to the XBee 802.15.4 Development Kit Getting Started Guide in the front matter. S February 2015 Updated European restrictions for transmitting below 10 dBm. Updated the warranty and certification information. Updated programming examples section. Corrected the maximum value of the IT command. Corrected P1 command parameters. Disclaimers Information in this document is subject to change without notice and does not represent a commitment on the part of Digi International. Digi provides this document as is, without warranty of any kind, expressed or implied, including, but not limited to, the implied warranties of fitness or merchantability for a particular purpose. Digi may make improvements and/or changes in this manual or in the product(s) and/or the program(s) described in this manual at any time.