COMPACT AND POWERFUL WIRED AND WIRELESS EMBEDDED MODULES DIGI CONNECT ME 9210 Ultra-compact high-performance embedded modules for M2M networking combine on-chip security The Digi Connect ME 9210 embedded module enables secure BLOCK DIAGRAM wired and wireless networking. Built on Digis powerful DIGI CONNECT ME NS9210 ARM9 processor, the high-performance module allows 9210 customers to implement next generation network-enabled RJ-45 w/Integrated products. Additionally, the RJ-45 form factor is pin compatible Magnetics with modules in the Digi Connect ME family. The module can provide future application-specific interface options through the programmable Flexible Interface Module (FIM), while keeping the main serial port or other key peripheral interfaces available. It is well-suited for more advanced core PHY 2 I C SPI module applications by supporting up to ten shared GPIOs, external IRQs and an extended set of peripheral interface options. ARM 8 MB The Digi Connect ME 9210 features the development and FLASH ARM926EJ-S operational benefits of Digi Remote Manager . This secure, DRPIC165X FIM 75 MHz highly-scalable platform seamlessly ties enterprise applications and remote devices together. Using Digi Remote Manager, Mem Power 16 MB UART GPIO SDRAM Ctrlr Mgmt customers can also easily configure, upgrade, monitor and troubleshoot their device from a centralized location. BENEFITS Integrated 10/100 Mbit Ethernet interface 20-Pin JTAG Connector Connector Support for Digi Embedded Linux and Digi NET+OS Industrial operating temperature System-on-Module RJ-45 form factor compatible with Digi Connect ME On-chip hardware encryption engine Extended set of on-chip interfaces and signals RELATED PRODUCTS Power management modes Low-emission design (FCC Class B) Digi Connect ConnectCore ConnectCard Digi XBee Development ME 9P 9215 for i.MX28 Kits 10 / 100 Ethernet MAC AES Accelerator JTAGDIGI JUMPSTART KIT OVERVIEW DIGI JUMPSTART KIT FOR NET+OS DIGI JUMPSTART KIT FOR EMBEDDED LINUX This royalty-free turnkey solution for embedded software development is based Built around a standard Linux 2.6 kernel distribution, the Digi JumpStart Kit for Embedded on the ThreadX Real-Time Operating System (RTOS), one of the most reliable and Linux is tailored to the specific needs of embedded Linux development and provides field-proven RTOS solutions available. In addition to ThreadX, NET+OS provides an easy-to-use, complete off-the-shelf embedded development platform. It includes all the integrated building blocks needed to create product solutions with leading components that are required to build secure network-enabled products based on the Digi network security using Digi embedded modules and microprocessors. Connect ME 9210 family. For professional NET+OS software development, the Eclipse based Digi ESP The kit includes Digi ESP for Embedded Linux, a powerful and fully Linux-hosted Integrated Development Environment (IDE) with graphical user interface and Integrated Development Environment based on the open Eclipse framework. Ideal for high-speed USB 2.0 hardware debugger is provided out-of-the-box. new and experienced Linux developers, Digi ESP improves software design productivity by accelerating and greatly simplifying driver and application development through a Royalty-free turnkey solution for embedded software development user-friendly graphical interface. Built on field-proven and compact ThreadX RTOS Fully integrated support for secure, IPv4/IPv6 networking applications Off-the-shelf development platform for network-enabled embedded systems Professional software development using Windows-based Digi ESP IDE Royalty-free and with optimized 2.6 kernel and services support Linux Digi ESP IDE for accelerated software development Full Linux and Digi BSP source code included SOFTWARE PLATFORM NET+OS EMBEDDED LINUX MODULE Digi Connect ME 9210 w/ 8 MB Flash, 16 MB SDRAM 1 RS-232 serial port, GPIO configuration switches, screw terminal for GPIO signals, prototyping area, status LEDs DEVELOPMENT BOARD (serial, GPIO, power), logic signal header, test points, reset button, user/wake-up buttons, PoE module header, 9-30 VDC power supply, JTAG header and RS-232 console/debug port for JTAG-equipped modules Digi Embedded Linux 4 DVD: Digi NET+OS CD: Digi Embedded Linux, Digi ESP IDE, Linux and platform CD/DVD NET+OS 7, Digi ESP IDE, BSP source code, sample code, specific source code, Universal boot loader source code Green Hills MULTI IDE support files, user documentation (U-Boot), sample code, documentation Quick start guide, Digi ESP tutorial, NET+OS porting guide, Quick start guide, Digi Embedded Linux users guide, hard- DOCUMENTATION NET+OS API documentation, Advanced Web Server, hardware ware reference manual, development board schematics reference manual, development board schematics External wall power supply (110/240 VAC) with interchangeable outlet adapters POWER SUPPLIES AND ACCESSORIES (North America, EU, UK, and Australia), crossover serial cable, Ethernet cable Digi JTAG Link USB 2.0 hardware debugger N/A OTHER Please refer to the feature specs on our website for detailed information about the specific software platform capabilities. WWW.DIGI.COM