EMBEDDED RF MODULES FOR OEMS DIGI XBEE S2C 802.15.4 RF MODULES Low-cost, easy-to-deploy modules provide critical end-point connectivity to devices and sensors Digi XBee RF modules provide OEMs with a common footprint communication, or as part of a more complex hub-and-spoke shared by multiple platforms, including multipoint and ZigBee/ network of sensors, Digi XBee 802.15.4 RF modules maximize Mesh topologies, and both 2.4 GHz and 900 MHz solutions. OEMs performance and ease of development. deploying the Digi XBee can substitute one Digi XBee for another, Digi XBee 802.15.4 modules seamlessly interface with compatible depending upon dynamic application needs, with minimal gateways, device adapters and range extenders, providing development, reduced risk and shorter time-to-market. developers with true beyond-the-horizon connectivity. Digi XBee 802.15.4 RF modules are ideal for applications The updated Digi XBee S2C 802.15.4 module is built with the requiring low latency and predictable communication timing. SiliconLabs EM357 SoC and offers improved power consumption, Providing quick, robust communication in point-to-point, peer- support for over-the-air firmware updates, and provides an to-peer, and multipoint/star configurations, Digi XBee 802.15.4 upgrade path to DigiMesh or ZigBee mesh protocols if desired. products enable robust end-point connectivity with ease. Whether deployed as a pure cable replacement for simple serial BENEFITS APPLICATION EXAMPLE Simple, out-of-the-box RF communications, no configuration needed Ethernet Point-to-multipoint network topology REMOTE MONITORING AND DIGI REMOTE MANAGER 2.4 GHz for worldwide deployment CONTROL OFFICE Common Digi XBee footprint for a variety of RF modules Industry leading sleep current of sub 1uA Cellular/VPN Firmware upgrades via UART, SPI or over the air Migratable to DigiMesh and ZigBee PRO protocols CONNECTPORT X4 H and vice-versa GATEWAY DIGI XBEE 802.15.4 RF MODULE Street Light RELATED PRODUCTS Light and Occupancy Sensor with Digi XBee 802.15.4 Street RF Module Light ConnectPort XBee XCTU Development Digi Remote X4/X4H Gateways Adapters Kits ManagerSPECIFICATIONS Digi XBee S2C 802.15.4 Digi XBee-PRO S2C 802.15.4 PERFORMANCE TRANSCEIVER CHIPSET Silicon Labs EM357 SoC DATA RATE RF 250 Kbps, Serial up to 1 Mbps INDOOR/URBAN RANGE* Up to 200 ft (60 m) Up to 300 ft (90 m) OUTDOOR/RF LINE-OF-SIGHT Up to 4000 ft (1200 m) Up to 2 miles (3200 m) RANGE* 3.1 mW (+5 dBm) / 6.3 mW (+8 dBm) 63 mW (+18 dBm) TRANSMIT POWER boost mode -100 dBm / -102 dBm boost mode -101 dBm RECEIVER SENSITIVITY (1% PER) FEATURES UART, SPI SERIAL DATA INTERFACE CONFIGURATION METHOD API or AT commands, local or over-the-air (OTA) FREQUENCY BAND ISM 2.4 GHz FORM FACTOR Through-Hole, Surface Mount HARDWARE S2C ADC INPUTS (4) 10-bit ADC inputs DIGITAL I/O 15 Through-Hole: PCB Antenna, U.FL Connector, RPSMA Connector, or Integrated Wire ANTENNA OPTIONS SMT: RF Pad, PCB Antenna, or U.FL Connector OPERATING TEMPERATURE -40 C to +85 C Through-Hole: 0.960 x 1.087 in Through-Hole: 0.960 x 1.297 in DIMENSIONS (L X W X H) AND (2.438 x 2.761 cm) (2.438 x 3.294 cm) SMT: 0.866 x 1.33 x 0.120 in SMT: 0.866 x 1.33 x 0.120 in WEIGHT (2.199 x 3.4 x 0.305 cm) (2.199 x 3.4 x 0.305 cm) NETWORKING AND SECURITY PROTOCOL Digi XBee 802.15.4 (Proprietary 802.15.4) UPDATABLE TO DIGIMESH Yes PROTOCOL UPDATABLE TO ZIGBEE Yes PROTOCOL INTERFERENCE IMMUNITY DSSS (Direct Sequence Spread Spectrum) ENCRYPTION 128-bit AES RELIABLE PACKET DELIVERY Retries/Acknowledgements PAN ID and addresses, cluster IDs and endpoints (optional) IDS 16 channels 15 channels CHANNELS POWER REQUIREMENTS SUPPLY VOLTAGE 2.1 to 3.6V 2.7 to 3.6V 33 mA 3.3 VDC / 120 mA 3.3 VDC TRANSMIT CURRENT 45 mA boost mode 28 mA 3.3 VDC / RECEIVE CURRENT 31 mA 3.3 VDC 31 mA boost mode POWER-DOWN CURRENT <1 A 25 C <1 A 25 C REGULATORY APPROVALS Yes Yes FCC, IC (NORTH AMERICA) ETSI (EUROPE) Yes No RCM (AUSTRALIA AND No (Coming soon) No (Coming soon) NEW ZEALAND) No (Coming soon) No (Coming soon) TELEC (JAPAN) *Range figure estimates are based on free-air terrain with limited sources of interference. Actual range will vary based on transmitting power, orientation of transmitter and receiver, height of transmitting antenna, height of receiving antenna, weather conditions, interference sources in the area, and terrain between receiver and transmitter, including indoor and outdoor structures such as walls, trees, buildings, hills, and mountains. WWW.DIGI.COM