XBee-PRO 868 Long-Range Embedded RF Modules for OEMs XBee-PRO 868 modules deliver wireless connectivity with exceptional RF range performance for European applications. Overview Application Highlight XBee-PRO 868 embedded RF modules provide extended-range wireless connectivity to end-point devices. These modules use a proprietary 868 MHz point-to-multipoint protocol for European applications. Capable of 500 mW of EIRP transmit power and -112 dBm receive sensitivity, the XBee-PRO 868 is the most powerful XBee product ever offered. Supporting RF line-of-sight distances up to 40 km, these modules are ideal for challenging environments where RF penetration and transmis- sion distance are critical to the application. As a part of Digis XBee family of RF products, these modules are easy to use, share a common hardware footprint, and are fully interoperable with other XBee products utilizing XBee-PRO 868 technology. They are available in a variety of different protocols to suit different applications, enabling users to substitute one XBee module for another with minimal development time and risk. Digis unsurpassed offering of products provides users with seamless communication between devices. XBee adapters provide wireless con- nectivity to electronic devices in wired networks. ConnectPort X gate- ways enable users to access and configure remote devices in a network. Features/Benefits 868 MHz short-range device G3 band for Europe No configuration needed for out-of-the-box RF communications Common XBee footprint for a variety of RF modules Simple-to-use peer-to-peer or point-to-multipoint Related Products topology Software selectable transmit power Outdoor RF line-of-sight range up to 40 km Multiple antenna options Gateways Development Kits Adapters www.digi.comPlatform XBee-PRO 868 Performance RF Data Rate 24 Kbps (limited to 10% duty cycle) Indoor/Urban Range Up to 1800 ft (550 m) Up to 25 miles (40 km) with dipole antenna Outdoor/RF Line-of-Sight Range (Italy only) up to 10 miles (16 km) with dipole antenna (13.7 dBm) Transmit Power 1 mW (0 dBm) to 315 mW (+25 dBm) -112 dBm or 500 mW EIRP Receiver Sensitivity (1% PER) Features Serial Data Interface 3.3V CMOS Serial UART Configuration Method API and AT commands Frequency Band 868 MHz ISM Interference Immunity Multiple transmissions, acknowledgements Serial Data Rate 1.2 Kbps to 230.4 Kbps (non-standard rates available) ADC Inputs 6 (10-bit) 13 Digital I/O Antenna Options Wired Whip, U.FL connector, RPSMA connector Networking & Security Encryption 128-bit AES Reliable Packet Delivery Retries/Acknowledgments Addressing Options Network ID, 64-bit address Channels Single channel Power Requirements 3.0 3.6VDC Supply Voltage 500 mA typical at 3.3V (800 mA max) Transmit Current Receive Current 65 mA typical Power-Down Current 55 uA typical 3.3V Regulatory Approvals FCC (USA) No IC (Canada) No ETSI (Europe) Yes (Italy 25 mW max) C-TICK (Australia) No No Telec (Japan) Point-to-Multipoint / Star Peer-to-peer (top view) (side views) 0.020 (0.51mm) PIN 20 0.031 0.110 shield-to-PCB (0.79mm) (2.79mm) PIN 1 0.080 0.020 (2.03mm 0.51) 0.050 1.297 (32.94mm) (1.27mm) PIN 10 PIN 11 0.160 (4.06mm) 0.866 (22.00mm) 0.079 0.960 (2.00mm) 91001490 You can purchase with con dence knowing that Digi is always available to serve you with expert technical B3/415 support and our industry leading warranty. For detailed information visit www.digi.com/support Digi International Digi International Digi International Digi International Digi International Worldwide HQ France Japan Singapore China 877-912-3444 +65-6213-5380 +86-21-50492199 +33-1-55-61-98-98 +81-3-5428-0261 952-912-3444 www.digi.fr www.digi-intl.co.jp www.digi.com.cn www.digi.com www.digi.com 1996-2015 Digi International Inc. All rights reserved. All other trademarks are the property of their respective owners.