MESH NETWORKING EMBEDDED RF MODULES FOR OEMS DIGI XBEE S2C DIGIMESH 2.4 Embedded RF modules deliver wireless connectivity using the innovative and easy-to-deploy DigiMesh protocol Digi XBee DigiMesh S2C 2.4 embedded RF modules provide Digi XBee products utilizing the same technology. They are wireless connectivity to electronic devices using a globally available in a variety of different protocols to suit different deployable 2.4 GHz transceiver. These modules use the applications, enabling users to substitute one Digi XBee DigiMesh networking protocol. This innovative, peer-to- module for another with minimal development time and risk. peer mesh network offers users added network stability The updated Digi XBee S2C DigiMesh module is built with through self-healing, dense network operation, extending the the SiliconLabs EM357 SoC and offers improved power operational life of battery dependent networks. consumption, support for over-the-air firmware updates, and Digi XBee modules are ideal for low-power applications. provides an upgrade path to IEEE 802.15.4 or ZigBee mesh Digi XBee-PRO modules are power-amplified versions of Digi protocols if desired. XBee modules for extended-range applications. Products in the Digi XBee family are easy to use, share a common hardware footprint, and are fully interoperable with other BENEFITS APPLICATION EXAMPLE No configuration needed for out-of-the-box RF communications Common Digi XBee footprint for a variety of RF modules Ethernet Simple topology to deploy and grow HEADQUARTERS DIGI REMOTE MANAGER 2.4 GHz for worldwide deployment Low-power Digi XBee or extended-range XBee-PRO (pin/over-the-air compatible) DIGIMESH WIRELESS MESH NETWORK Wireless/Telco/VPN Multiple antenna options Outdoor RF line-of-sight range up to 2 miles (3.2 km)* with high-gain antennas CONNECTPORT X GATEWAY DigiMesh peer-to-peer mesh networking protocol DIGI XBEE S2C DIGIMESH MODULE - Supports self-healing and discovery for network stability Street Light RELATED PRODUCTS Street Light Street Light Gateways Modules Adapters Network Development Extenders KitsSPECIFICATIONS Digi XBee S2C DigiMesh 2.4 DigiXBee-PRO S2C DigiMesh 2.4 PERFORMANCE TRANSCEIVER CHIPSET Silicon Labs EM357 SoC Silicon Labs EM357 SoC DATA RATE RF 250 Kbps, Serial up to 1 Mbps RF 250 Kbps, Serial up to 1 Mbps INDOOR/URBAN RANGE* Up to 200 ft (60 m) Up to 300 ft (90 m) OUTDOOR/RF LINE-OF-SIGHT Up to 4000 ft (1200 m) Up to 2 miles (3200 m) RANGE* 3.1 mW (+5 dBm) / 6.3 mW (+8 dBm) 63 mW (+18 dBm) TRANSMIT POWER boost mode -100 dBm / -102 dBm boost mode -101 dBm RECEIVER SENSITIVITY (1% PER) FEATURES UART, SPI UART, SPI SERIAL DATA INTERFACE CONFIGURATION METHOD API or AT commands, local or over-the-air (OTA) API or AT commands, local or over-the-air (OTA) FREQUENCY BAND ISM 2.4 GHz ISM 2.4 GHz FORM FACTOR Through-Hole, Surface Mount Through-Hole, Surface Mount HARDWARE S2C S2C ADC INPUTS (4) 10-bit ADC inputs (4) 10-bit ADC inputs DIGITAL I/O 15 15 ANTENNA OPTIONS Through-Hole: PCB Antenna, U.FL Connector, RPSMA Connector, or Integrated Wire SMT: RF Pad, PCB Antenna, or U.FL Connector OPERATING TEMPERATURE -40 C to +85 C -40 C to +85 C Through-Hole: 0.960 x 1.087 in Through-Hole: 0.960 x 1.297 in DIMENSIONS (L X W X H) AND (2.438 x 2.761 cm) (2.438 x 3.294 cm) SMT: 0.866 x 1.33 x 0.120 in SMT: 0.866 x 1.33 x 0.120 in WEIGHT (2.199 x 3.4 x 0.305 cm) (2.199 x 3.4 x 0.305 cm) NETWORKING AND SECURITY PROTOCOL Digi XBee DigiMesh 2.4 (Proprietary 802.15.4 based mesh protocol) Digi XBee DigiMesh 2.4 (Proprietary 802.15.4 based mesh protocol) UPDATABLE TO DIGI 802.15.4 Yes Yes PROTOCOL UPDATABLE TO ZIGBEE Yes Yes PROTOCOL INTERFERENCE IMMUNITY DSSS (Direct Sequence Spread Spectrum) DSSS (Direct Sequence Spread Spectrum) ENCRYPTION 128-bit AES 128-bit AES RELIABLE PACKET DELIVERY Retries/Acknowledgements Retries/Acknowledgements IDS PAN ID and addresses, cluster IDs and endpoints (optional) PAN ID and addresses, cluster IDs and endpoints (optional) 16 channels 15 channels CHANNELS POWER REQUIREMENTS 2.1 to 3.6V 2.7 to 3.6V SUPPLY VOLTAGE 33 mA 3.3 VDC / 120 mA 3.3 VDC TRANSMIT CURRENT 45 mA boost mode 28 mA 3.3 VDC / 31 mA 3.3 VDC RECEIVE CURRENT 31 mA boost mode POWER-DOWN CURRENT <1 A 25 C <1 A 25 C REGULATORY APPROVALS Yes Yes FCC, IC (NORTH AMERICA) ETSI (EUROPE) Yes No RCM (AUSTRALIA AND Yes Yes NEW ZEALAND) TELEC (JAPAN) Yes No (Coming soon) *Range figure estimates are based on free-air terrain with limited sources of interference. Actual range will vary based on transmitting power, orientation of transmitter and receiver, height of transmitting antenna, height of receiving antenna, weather conditions, interference sources in the area, and terrain between receiver and transmitter, including indoor and outdoor structures such as walls, trees, buildings, hills, and mountains. WWW.DIGI.COM