1300 Henley Court Pullman, WA 99163 509.334.6306 www.digilentinc.com ZYBO FPGA Board Reference Manual Revised April 11, 2016 This manual applies to the ZYBO rev. B Overview The ZYBO (ZYnq BOard) is a feature-rich, ready-to-use, entry-level embedded software and digital circuit development platform built around the smallest member of the Xilinx Zynq-7000 family, the Z-7010. The Z-7010 is based on the Xilinx All Programmable System-on-Chip (AP SoC) architecture, which tightly integrates a dual-core ARM Cortex-A9 processor with Xilinx 7-series Field Programmable Gate Array (FPGA) logic. When coupled with the rich set of multimedia and connectivity peripherals available on the ZYBO, the Zynq Z-7010 can host a whole system design. The on-board memories, video and audio I/O, dual-role USB, Ethernet, and SD slot will have your design up-and-ready with no additional hardware needed. Additionally, six Pmod ports are available to put any design on an easy growth path. The Zynq 7010 AP SoC offers the following features: 650Mhz dual-core Cortex-A9 processor DDR3 memory controller with 8 DMA channels High-bandwidth peripheral controllers: 1G Ethernet, USB 2.0, SDIO 2 Low-bandwidth peripheral controller: SPI, UART, CAN, I C Reprogrammable logic equivalent to Artix-7 FPGA o 4,400 logic slices, each with four 6-input LUTs and 8 flip-flops o 240 KB of fast block RAM o Two clock management tiles, each with a phase-locked loop (PLL) and mixed-mode clock manager (MMCM) o 80 DSP slices o Internal clock speeds exceeding 450MHz o On-chip analog-to-digital converter (XADC) Copyright Digilent, Inc. All rights reserved. DOC : 502-279 Page 1 of 26 Other product and company names mentioned may be trademarks of their respective owners. ZYBO FPGA Board Reference Manual ZYNQ XC7Z010-1CLG400C 512MB x32 DDR3 w/ 1050Mbps bandwidth Dual-role (Source/Sink) HDMI port 16-bits per pixel VGA source port Trimode (1Gbit/100Mbit/10Mbit) Ethernet PHY MicroSD slot (supports Linux file system) OTG USB 2.0 PHY (supports host and device) External EEPROM (programmed with 48-bit globally unique EUI-48/64 compatible identifier) Audio codec with headphone out, microphone and line in jacks 128Mb Serial Flash w/ QSPI interface On-board JTAG programming and UART to USB converter GPIO: 6 pushbuttons, 4 slide switches, 5 LEDs Six Pmod ports (1 processor-dedicated, 1 dual analog/digital, 3 high-speed differential, 1 logic- The ZYBO Zynq-7000 development board. dedicated) The ZYBO is compatible with Xilinx s new high-performance Vivado Design Suite as well as the ISE/EDK toolset. These toolsets meld FPGA logic design with embedded ARM software development into an easy to use, intuitive design flow. They can be used for designing systems of any complexity, from a complete operating system running multiple server applications in tandem, down to a simple bare-metal program that controls some LEDs. An accessory kit that contains a 5V/2.5A power adapter, a USB A to Micro B cable, an 8GB speed class 10 microSD card, and a Xilinx voucher for a Vivado Design Suite license will be available to purchase separately off of the Digilent website in the near future. The Vivado Design Suite license enables use of the Logic Analyzer tools, which accelerate debug and testing. This license is a 1 year, device-locked license, and will only work with the Z-7010 Zynq part on the ZYBO. After the license expires, any version of Vivado Design Suite that was released during this 1 year period can continue to be used indefinitely. Copyright Digilent, Inc. All rights reserved. Page 2 of 26 Other product and company names mentioned may be trademarks of their respective owners.