PC, HDMI, DISPLAY PORT, SDI INTERFACE CONTROLLER FOR TFT PANEL Model: ALR-1920-SDI Part number : 41728001X-3 or up INSTRUCTIONS CONTENTS Page: 2. Introduction, How to Proceed, Usage Note, Disclaimer 3. System design Diagram of a suggested system 4. Assembly notes Important information about system elements 6. Connection & Operation How to use the controller 10. Connectors, pinouts & jumpers Essential connection information 19. Controller dimensions 20. Application notes 22. Troubleshooting 23. Specifications 24. Appendix I Mode Support Table 27. Appendix II RS-232 control protocols 30. Appendix III Mapping definition 32. Appendix IV Auto Color Gain 33. Appendix V DV remote control unit work for ALR-1920-SDI 34. Warranty, Caution & Limitation of Liability, Trademarks 35. Contact details It is essential that these instructions are read and understood before connecting or powering up this controller. Introduction Designed for LCD monitor and other flat panel display applications, ALR-1920-SDI is the single board solution for supporting ARGB, HDMI, Display Port, SDI input controller for driving the panel up to 1920x1200 resolution. This controller is the combo version for ALR-1920 and HD-3000S. This product design for the monitor series : TFT (active matrix) LCDs with LVDS interface of 1920x1200, 1920x1080, 1680x1050, 1600x1200, 1400x1050, 1440x900, 1366x768, 1280x1024, 1280x800, 1280x768, 1024x768, 1024x600, 800x600, 800x480, 640x480, 480x640 resolution Support HDMI, VGA, Display port, SDI input Support ARGB signal up to WUXGA resolution. Support HDMI 1.3 input up to 1080p/WUXGA resolution. Support single-link Display Port 1.1a Support 1.5Gbits & 3Gbits bit rate SDI input signal support SDI re-clock loop through output. Support LVDS interface panel HOW TO PROCEED Ensure you have all parts & that they are correct, refer to: Connection diagram (separate document for each panel) Connector reference (in following section) Assembly notes Check controller switch & jumper settings (errors may damage the panel) Prepare the PC Connect the parts Understand the operation and functions (in following section) IMPORTANT USAGE NOTE This product is for use by system developers and integrators, the manufacturer accepts no liability for damage or injury caused by the use of this product. It is the responsibility of the developer, integrators or other user of this product to: Ensure that all necessary and appropriate safety measures are taken. Obtain suitable regulatory approvals as may be required. Check power settings to all component parts before connection. Understand the operation and connectivity requirements of this controller. DISCLAIMER There is no implied or expressed warranty regarding this material. Page 2 of 35