511322-0017 Diode Laser Concepts

THIS MATERIAL IS PROPRIETARY AND CONFIDENTIAL TO DLC AND IS NOT TO BE DISCLOSED, COPIED OR USED AS THE BASIS FOR A DESIGN WITHOUT THE WRITTEN PERMISSION OF DLC. MECHANICAL REVISION HISTORY SPECIFCATIONS REV DESCRIPTION DATE APPROVED Laser Material: InGaAlP 1 Originate Document 10/16/06 Zack S. Housing Material: Aluminum* Type III Class 2 Black Anodized 1.5 mm 65.2 Exit Aperture Protection: Sapphire Window 0.06 2.57 in Lens Material: Glass 55.1 1.5 mm 2.2 0.1 in OPTICAL mm 52.1 0.5 SPECIFCATIONS 2.05 0.02 in Wavelength (25C): Various within the range of 630nm - 830nm* 0.15 mm 31.75 0.006 1.250 in Wavelength Stability 0.25nm / C (Nominal) 0.25 mm 2.92 Output Power (Exit Aperture): Varies with specific laser choice and fan angle* 0.115 0.010 in Output Power Stability (25C): <1% Fluctuation over 60 Minutes Output Power vs. Temperature: <0.5% / C (Nominal) Black (-) Blue (+) Fan Angle: 10, 45, 60, 90 (Nominal)* Line Thickness : ~1mm at 1 Meter (varies with lens and focus)* Line Intensity Profile: Gaussian Emissions Indicator: Red LED Modulation / NC POINTING Mounting Surface and Heat Sink + 0.00 0.1 mm 0.1 mm 18.5 SPECIFCATIONS 12.4 19.05 mm - 0.05 0.004 0.004 0.730 in 0.490 in Accuracy: <2mrad +0.000 IP68 IP68 M12X1 MalM12X1 Malee Receptacle Receptacle 0.750 in - 0.002 Stability vs. Temperature: <10rad / C ELECTRICAL SPECIFCATIONS Operating Voltage: 5VDC Regulated +/- 1% * (24VDC option available) 56.5 1.5 mm Load Current Typical at 25C: Varies with Output Power and Wavelength 2.22 0.06 in Load Current Max. at 25C: Varies with Output Power and Wavelength 52.0 0.5 mm Continuous Wave: Turn on Time <0.1s 2.05 0.02 in Case: Electrically Isolated mm 31.75 0.15 0.006 Electronic Protection: Reverse Polarity Protection 1.250 in Over Voltage Protection 0.25 mm 2.92 Surge Protection 0.010 0.115 in Interconnect: IP68 M12 X 1 Male Receptacle (Standard) (See Drawing) 2.5mm Male DC Power Jack (Option) ENVIRONMENTAL SPECIFCATIONS Operating Temperature: -10 to 50C (60C, 70, 80C) * Storage Temperature: -40C to 85C Static Discharge Immunity: >12Kv (Contact) Mounting Surface and Heat Sink + 0.00 0.1 mm mm 18.5 mm 12.4 0.1 19.05 - Dust/Water Resistance: Yes 0.05 0.004 0.004 0.730 in 0.490 in 2.5mm Mal2.5mm Malee DC Ja DC Jackck +0.000 0.750 in - 0.002 RELIABILITY/REGULATORY SPECIFCATIONS APPROVALS DATE DIODE LASER CONCEPTS, INC. Certifications: RoHS compliance CE Drawn By: 4731 Industry Drive CDRH Class Dependant Upon Output Power and 10/16/06 Zack S. Central Point, Oregon 97502 USA Wavelength Part Number: Approved By: 10/16/06 Mike R. Specific part numbers are issued according to configuration. Warranty: 2 Years Customer Approval: Description: N/A N/A General specifications for Industrial line generator modules. *Indicates Customization Available X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Industrial Lasers category: Click to view products by Diode Laser Concepts manufacturer: Other Similar products are found below : 511322-0009 511322-0037 511322-0005 511322-0014 511322-0036 511322-0017 581222-0001