74LVC1G00QW5-7 Diodes Incorporated

74LVC1G00Q SINGLE 2 INPUT POSITIVE NAND GATE Description Pin Assignments The 74LVC1G00Q is an automotive compliant, single, 2-input positive NAND gate with a standard push-pull output. The device is designed for operation with a power supply range of 1.65V to 5.5V. The inputs are tolerant to 5.5V allowing this device to be used in a mixed-voltage ( Top View ) environment. The device is fully specified for partial power-down applications using I . The I circuitry disables the output OFF OFF preventing damaging current backflow when the device is powered A 1 5 Vcc down. B 2 The gate performs the positive Boolean function: 3 4 GND Y Y = A B or Y A B SOT25 / SOT353 Applications Features Grade 1 Ambient Temperature Operation: -40C to +125C Voltage Level Shifting Wide Supply Voltage Range from 1.65V to 5.5V General Purpose Logic 24mA Output Drive at 3.3V Power-Down Signal Isolation CMOS Low Power Consumption Wide Array of Products such as: I Supports Partial-Power-Down Mode Operation Automotive Applications within Grade 1 Temperature OFF Inputs Accept up to 5.5V Range ESD Protection Tested per AEC-Q100 Industrial Computing/Controls/Automation Exceeds 2000V Human Body Model (AEC-Q100-002) High-Reliability Networking/Communications Exceeds 1000V Charged Device Model (AEC-Q100-011) Industrial/Agricultural Equipment Latch-Up Exceeds 100mA (AEC-Q100-004) Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. Green Device (Note 3) The 74LVC1G00Q is suitable for automotive applications requiring specific change control this part is AEC-Q100 qualified, PPAP capable, and manufactured in IATF 16949 certified facilities. 74LVC1G00Q Pin Descriptions Logic Diagram Pin Name Description A Data Input 1 4 A B Data Input Y 2 B GND Ground Y Data Output VCC Supply Voltage Function Table Inputs Output A B Y H H L L X H X L H Absolute Maximum Ratings (Notes 4 & 5) Symbol Description Rating Unit ESD HBM Human Body Model ESD Protection 2 kV ESD CDM Charged Device Model ESD Protection 1 kV Supply Voltage Range -0.5 to 6.5 V VCC Input Voltage Range -0.5 to 6.5 V VI VO Voltage Applied to Output in High Impedance or IOFF State -0.5 to 6.5 V VO Voltage Applied to Output in High or Low State -0.5 to VCC +0.5 V I Input Clamp Current V < 0 -50 mA IK I I Output Clamp Current -50 mA OK I Continuous Output Current 50 mA O I , I Continuous Current Through V or GND 100 mA CC GND CC Operating Junction Temperature -40 to +150 C TJ Storage Temperature -65 to +150 C TSTG Notes: 4. Stresses beyond the absolute maximum can result in immediate failure or reduced reliability. These are stress values and device operation should be within recommend values. 5. Forcing the maximum allowed voltage could cause a condition exceeding the maximum current or conversely forcing the maximum current could cause a condition exceeding the maximum voltage. The ratings of both current and voltage must be maintained within the controlled range. 2 of 9 74LVC1G00Q June 2020 Diodes Incorporated www.diodes.com Document number: DS39785 Rev. 2 - 2