AH3382 HIGH VOLTAGE ULTRA HIGH SENSITIVITY HALL EFFECT LATCH WITH INTERNAL PULL-UP RESISTOR Description Pin Assignments The AH3382 is a high voltage ultra high sensitivity Hall Effect Unipolar switch IC designed for proximity, position and level sensing (TOP View) in industrial and consumer home appliances and personal care applications. To support wide range of demanding applications, the 3 OUTPUT design has been optimized to operate over the supply range of 3.0V GND 2 to 28V. With chopper stabilized architecture and an internal bandgap 1 V DD regulator to provide temperature compensated supply for internal circuits, the AH3382 provides a reliable solution over the whole SC59 and SOT23 operating range. For robustness and protection, the device has a reverse blocking diode with a Zener clamp on the supply. The output has an over current limit and a Zener clamp. The internally pulled-up output can be switched on with South pole of sufficient strength. When the magnetic flux density (B) perpendicular (TOP View) to the package is larger than the operate point (B ) the output is OP 3. OUTPUT switched on (pulled low) and is held on until magnetic flux density B is lower than the release point (B ). The output remains switched off for GND RP 2. North pole fields to or no magnetic fields. 1. V DD SIP-3 (Bulk Pack) The magnetic operating and release polarity is opposite for SOT23 and SC59 packages. The SOT23 and SIP-3 (Ammo Pack), SIP-3 (Bulk Pack) packages will require south pole to the part marking side to operate while SC59 will require south pole to the non-part marking side. Applications Features Position and Proximity Sensing in Industrial Applications Unipolar Operation Applications High Sensitivity: BOP and BRP of +55G and +35G Typical Open and Close Detect Internally Pull-up Resistor on the Output with Over Current Limit Position Detect 3.0V to 28V Operating Voltage Range Level Detect Chopper Stabilized Design Provides Flow Meters o Superior Temperature Stability Contact-less Switches o Minimal Switch Point Drift o Enhanced Immunity to Stress Good RF Noise Immunity Reverse Blocking Diode Zener Clamp on Supply and Output Pins -40C to +125C Operating Temperature ESD: HBM 6kV Industry Standard SC59, SOT23 and SIP-3 (Ammo Pack), SIP-3 (Bulk Pack) Packages Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. Green Device (Note 3) Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 2. See Low-Pass Filter Sample and Hold Dynamic Offset Cancellation AH3382 Typical Applications Circuit 3.0V to 28V V DD OUTPUT AH3382 C IN GND Note: 4. C is for power stabilization and to strengthen the noise immunity, the recommended capacitance is 10nF ~ 100nF. IN Pin Descriptions Package: SC59, SOT23 and SIP-3 (Ammo Pack), SIP-3 (Bulk Pack) Pin Number Pin Name Function 1 Power Supply Input V DD 2 GND Ground 3 OUTPUT Output Pin Functional Block Diagram V DD Power switch To All Subcircuits OUTPUT Amp Amp Control Current Limit GND 2 of 14 AH3382 July 2016 Diodes Incorporated www.diodes.com Document number: DS38921 Rev. 1 - 2 NEW PRODUCT